BLEEDRED
01-11-2005, 07:12 AM
Seems like I might be running lean at times. Any help and/or suggestions would be much appreciated. I want to set up for cold weather, 0-20F and my elevation is around 900 feet.
My current mods are as follows:
440 big bore, 10.56:1 compression, K&N air filter, stock head pipe and White Brothers E-series slip on wide open with no spark arrestor and no discs.
My current jetting is set up as follows:
160 main, 42 pilot, needle clip in the 4th position down and the fuel air screw 2.5 turns out from lightly seated.
The bike starts up like a champ and idles with no problems. Seems to pop a little in the cold weather when the throttle is pinned.
My current mods are as follows:
440 big bore, 10.56:1 compression, K&N air filter, stock head pipe and White Brothers E-series slip on wide open with no spark arrestor and no discs.
My current jetting is set up as follows:
160 main, 42 pilot, needle clip in the 4th position down and the fuel air screw 2.5 turns out from lightly seated.
The bike starts up like a champ and idles with no problems. Seems to pop a little in the cold weather when the throttle is pinned.