Idea For Your Older Razrs.

[250EXking]

Heres what my buddy did with a dremil tool to a set of his Maxxis Razrs. It acutally did improve traction. It kinda takes after the Holeshot Idea. Take a look and tell me what you guys think. Its kinda like doing ur Turf Tamers up but with older Razrs. What do you guys think.

http://www.imagestation.com/picture/sraid153/p75868971292a90cca71c1973a3c87451/f594ce33.jpg

[zlam27]

i guess if you have a set of tires that are getting old and not hookin up like you would like, go for it. what have you got to lose? whatever works.....

zach

[250EXking]

Yeah the tires were getting older and he wanted to try something out. ANd it works pretty good.

[bradley300]

i think if you did the same to a set of razr 2's you would have the best tire ever. just groove every other lug like that and same with the fronts

[Rootar]

you got a good idea one of you "richer" guys with razr2s ought to give this idea a try :ermm:

[throwinitup]

ill try it out once mine wear more, if they ever do :eek2: but hey thats a good thing :D

Good idea! yea my holeshots were so ald before that the lug way down was showing perfectly there was like no tread..so i wanted to clean out the middle of the holeshot! lol never did though...i love my klaws!

[markk]

I actully thought about taking the front tires and Barowing my buddies grover, and Groving out spaces on the center line of tread, To sorta make them a little like th razr 2's! I also took my cutting wheel, and cut groves into my shredders! It seemed to work a little better, But iono if it was actully worth the time.

[JR3]

Originally posted by 250EXking
Heres what my buddy did with a dremil tool to a set of his Maxxis Razrs. It acutally did improve traction. It kinda takes after the Holeshot Idea. Take a look and tell me what you guys think. Its kinda like doing ur Turf Tamers up but with older Razrs. What do you guys think.

http://www.imagestation.com/picture/sraid153/p75868971292a90cca71c1973a3c87451/f594ce33.jpg

looks like a good idea but why is ur buddy running no disks in his e series doesnt the exhaust have to come out of them cause the metal plate is solid id like to try it if it makes it run any better etc

[400ex28]

Good idea, I may have to give that a try sometime.

[nacs400ex]

Originally posted by JR3
looks like a good idea but why is ur buddy running no disks in his e series doesnt the exhaust have to come out of them cause the metal plate is solid id like to try it if it makes it run any better etc

You take the backing plate off, so it allows the exhaust to exit out the end instead of the side.

[JR3]

how is the backing plate held on will i have to cut it out or is there bolts holding it on

[250EXking]

There are bolts holdoing on your disc. Just make sure your exhaust is cold when you work with the screws, you can mess up the threads when you take them out. Make sure you use a little heat grease when you put them back in. Yeah I use to run no disc in my WB pipe. That solid disc on ur pipe is the spark aresttor. When u take out that disc it is loud as heck though. But yeah you can take the disc out and mess around with settings.

[JR3]

k thanx im gonna do it today and see how i like it

[JR3]

Just did it man its loud. But i did notice a lil power increase. Any idea of how many decibls it is this way?

[250EXking]

um i think 106, my buddy had his checked at a park one time. to loud to ride in most areas.

[JR3]

Ok thanks for the help. :)