camber adjust help??/

[Sprks450r04]

can someone tell me the procedure to adjust the camber on my burgard a-arms the correct way

[Sprks450r04]

can anyone telll me ????

[TBD]

I have not actually installed these paticular arms but unless they do something really wierd it should be the same. You would turn the upper ball joint in or out off the upper arm depending on which way you have to move the camber. I personally would set the camber at 2 degrees. If you were running a motocross set up I would recomend 3 degrees. For trail riding or duning I would stick with 2.

[Sprks450r04]

how do i measure the degrees

[TBD]

I use a digital level. You can get a inexpensive dial gauge at Sears, Home Depot and a lot of other places that carry tools. Whatever you use make sure it reads in degrees. When you take the degree measurement you will need to put the gauge flat against the wheel. Use a piece of wood or steel to put up against the wheel and make sure that where your placing the gauge that the wheel is not dinged or bent so that you get a accurate reading.

[Sprks450r04]

thanks man ill try that

[TBD]

If you need more info or help just pm me.