maskale
01-01-2005, 12:05 PM
I had stock suspension on my 400ex with 20" tires and on big jumps my frame would hit the ground between the a-arms before the shocks would bottom out. I just got my Roll +3 with Elka LT and now my shocks go all the way to the shaft bumper and my frame is still 2" or 3" off the ground, I know the rubber bumper on the shock will give alittle, but I dont think enough for the frame to go to the ground. It seems to me that you would want the frame to hit just before the shock runs out of travel so that you are not putting all that stress on the shocks. Is something wrong with my setup or are the shocks made to bottom out, before the frame hits the ground.
Also just another jetting question, sorry
I have a 440 with a cam, K@N no lid and a Sparks X6, It runs ok but could do better, what jets should I be running. I am in Houston Tx. about 45 miles from the cost so the elevation should not be very much.
Thanks.
Also just another jetting question, sorry
I have a 440 with a cam, K@N no lid and a Sparks X6, It runs ok but could do better, what jets should I be running. I am in Houston Tx. about 45 miles from the cost so the elevation should not be very much.
Thanks.