300ex black handle plastic

[jiggaman2401]

Where did you 300ex guys remount your key switch when you put new bars on your machine, since the stock plstic wont work anymore??

[QUADMASTER]

i cut a hole in the plastic right above where your gas tank stickers are, you know that piece of plastic under and around your headlight, that way it is close and on the side so you can get it. just look at this pic. http://www.imagestation.com/picture/sraid152/p6504363ecc11083e8ebd88d0c9f5b876/f5b178a6.jpg

[hardkoratvmxr]

i built my own key reverse and neutral light holder that mounts to the same bolts your lights did and it holds all of the wires in a nice spot

[rollie]

Originally posted by QUADMASTER
i cut a hole in the plastic right above where your gas tank stickers are, you know that piece of plastic under and around your headlight, that way it is close and on the side so you can get it. just look at this pic. http://www.imagestation.com/picture/sraid152/p6504363ecc11083e8ebd88d0c9f5b876/f5b178a6.jpg

thats also what i did....works well

[drifterx]

same with me! works great! get a 1 inch hole driller, its perfect size, and cut it out of the plastic. you have to make a notch for the thing in the key that keeps it from spinning too, really easy to do.

[exrider360]

i did the same with mine it works great and looks better to or you could make a aluminin plate and mount it into the handlebar clamps

[gratzracing24]

zip tied it to one of the wires that connect to the starter

[2001300exguy]

i ziptied it to the handlebar i used four on each( the lights and switch) ill try and get a pic but someone else will have to post it for me