new piston and cam making a klinging noise

[drgn_erth]

i just put in a new wiseco forged piston and a hotcams stage 1 in and its making a klinging noise any ideas

its in time i checked

[Doibugu2]

did you adjust your valves to the specs of the new cam?

[mojoe2878]

the piston will make the noise until it warms up and expands in the cylinder, its normal.
the hot cam will also make a ticking noise at all times even after the valves are adjusted right, they are just louder than stock cams.

[sampleez]

how loud is this. if it's pretty loud it could be that ur timing is a little off. mine was off enough that the valves were hitting the piston, and the timing was correct. i found that my timing chain was stretched enough that the timing was off. so this could be the prob.... or valves need tightening

[drgn_erth]

it was just where i hadnt adjusted the valves. after i done that all you can hear is the ticking of the new cam.