400ex parts fitting 450R

[steveatv3]

I am picking up my 450R this wednesday and i have the following parts off my 440ex and i am wondering if they will fit

*Elka Quadrate front shocks LT

*LSR Long travel +3+1 a-arms

*Lsr +4 axle

*Elka dual rate zps rear shock

*AC stadium bumper

[btlblwnracer]

the bumper will fit , the shocks will fit but are shorter (eyelet to eyelet ) so bottoming out on the frame may be an issue , as for the other parts i have no clue if they would work or not .

[steveatv3]

alright, well thanks i think the 450R has the same swingarm setup so i think the axle will fit

[440ex kid]

Your shocks are lt so you will need lt a-arms that use the same length shock, the 400 a-arms will not work. The axle will fit with some modification. The rear shock I think is shorter but might work.

[steveatv3]

Originally posted by 440ex kid
Your shocks are lt so you will need lt a-arms that use the same length shock, the 400 a-arms will not work. The axle will fit with some modification. The rear shock I think is shorter but might work.

What is the differents between the a-arms that the 400ex ones wont work, and they are LT to match the shocks

[440ex kid]

The 400 a-arms are like 1/2 wider at the frame then the 450r. I ment the shocks will bolt up, but if they are 19 inches you will need an a-arms for 19 inch shocks for the 450.