CR kill switch as starter

[JDiablo]

hey just wondering how small is this?because on my flexx bars it is so tight that i have no were to mount my kill switch and was thinking of eliminating the lightswitch/start switch and just going with the CR
All you have to do is cut the two wires from the start button and connect them to the CR button?and mount it right?And with this mod you can't start in any gear anymore,well unless you hook up those two wires...anyone have pix as well thanks

[Out_Sider]

it is small, saves alot of space and is easy to do, and for the start in gear stuf, just hook those 2 wires to eachother and thats tooken care of

[JDiablo]

i did that on my 300ex though and it killed my battery juice:ermm: will it do the same on the 400>?

[BSTURDIVANT]

Best to use Kawasaki KX kill button- take your start switch apart and locate the 2 wires going to the button cut into covering below switch next to plug in and cut and splice.

[JDiablo]

does it matter which wires i hook up to the original wires?or what?

[hessianmx111]

http://www.exriders.com/vbb/showthread.php?threadid=67508&highlight=starter
This should help you out.

[JDiablo]

Originally posted by hessianmx111
http://www.exriders.com/vbb/showthread.php?threadid=67508&highlight=starter
This should help you out.

thanks bro:D

so should i go with the CR or the KX one then?

[nacs400ex]

Originally posted by BSTURDIVANT
Best to use Kawasaki KX kill button- take your start switch apart and locate the 2 wires going to the button cut into covering below switch next to plug in and cut and splice.

Whats the advantage of using the KX over the CR??

[BSTURDIVANT]

Waterproof and lasts longer! Also has 2 wires some only have 1-You never want to use 1 that has to be grounded- runs your battery down!