View Full Version : easy installation?
redrider311
12-24-2004, 11:27 AM
i just purchased an LSR +2/+4 axle.. and i was going to havea friend install it for me.. but i wanted to know if this was something i could do myself... i kinda just wanted to know what to do and some kinda instructions.. thanks guys
400exrider707
12-24-2004, 11:49 AM
Pretty simple. More tedious than anything but anyone who is even barely mechanically inclined could do it.
JRDrider22
12-24-2004, 12:26 PM
just make sure you know which bolts go where and what ever way it comes off it has to go on too the same way. YOU MAY HAVE A PROBLEM WITH THE AXLE NUT. go out and get a antifade as well too.
redrider311
12-24-2004, 01:07 PM
tell me if this is an ok thing to do...
take off the wheels and hubs..
loosen the chain.. take off the sproket and brakes and stuff..
how do i get the axle nut off? ive heard theres alot of problems with this.. and then what do i do after that? do i need to grease anything etc etc. ?
JRDrider22
12-24-2004, 01:09 PM
sound pretty good. the axle nut is reverse thread, remember that. and dont ruin the o ring clip
Tommy 17
12-24-2004, 01:54 PM
#1 pull wheels off
#2 pull hubs off
#3 loosen the axle nut (leave the chain and brake on for this... u need something to stop the axle from spinning because sometime its a ***** to get off) remember its also a reversed tread
#4 once the axle nut is loose take off the chain and brakes
#5 back the nut off the axle till u can see the snap ring
#6 take off the snap ring
#7 slide the lock nut off
#8 slide the brake rotor off the axle
#9 slide the axle out of the carrier towards the chain side
now if ur goin to leave the carrier in u don't need to do these steps just slide teh new axle back in and put everything back...
if u take the carrier out to inspect it or replace it also u need 2
#1 pull the locking snap ring off the brake side
#2 slide off the brake calipar holder
#3 slide the carrier out towards the chain side
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.