Looking for a 400ex cheap? To make a 650ex

[Humdinger4u]

I'm looking for a straight frame and "A" arms, It can have a blown motor, broken plastic, tore seat, bald tires....I don't care what it looks like other than I need a straight frame and be somewhat complete. In other words I'm looking for a project 400ex; I want to make a 650ex or 750ex to play in the sand.

I live in Denver, I would drive to any of the neighboring states to pick it up, don't want to pay for shipping unless it's a GREAT deal.

Let me know guys?

Email address is: Briels1@comcast.net

303-657-9258

Michael

[YZ400EX]

http://www.exriders.com/vbb/showthread.php?s=&threadid=136902

Let me know if you are interested in anything..

[Humdinger4u]

Bump

[Humdinger4u]

440EXGUY

I'm looking for a whole machine not just parts right now, but thanks. A whole machine that's close to being complete but not in the greatest condition but is straight, the motor could be blown too. I just need a good starting point to turn it into a 650 or even a 750??

Fun in the sand!!!!!

Thanks again 440EXGUY, Michael

[WRXen]

I replied to your post in the wanted ad, but might have what you need. I just got done replcacing the bearing carrier and need to put on the chain and adjust the rear breaks. the motor is blown, and I want to get rid of it, so I can get a yfz. anyways the atv does have ac nerf bars w/ pro pegs and heel guards, pro taper handlebars, ITP wheels used 3 days, maier plastics, big gun race exhaust w/ header, k&n filter, RPM bearing carrier, DID chain, 14 tooth chain, and most of the stock parts. I wanted to get $1500 for all of this, but don't mine parting out the aftermarket parts. fact is my wife won't let me buy the yfz until the 400ex is out of the garage, so lets see what we can do!!!!!!!!

Mike D