In-Hoc
12-21-2004, 08:39 PM
I have a 2002 Raptor set up for MX.
- Blue plastic and Blue Frame, race cut fenders (average shape)
- +2 Burgard chromoly A-arms
- Gibson built triple rate front shocks with rezzy’s
- +1 steering stem, Pro-Taper Handlebars
- Clear high pressure coolant lines
- Pro flow intake with outerwears air box cover
- Yoshumira full system exhaust
- Lonestar axcalibur +4 axle w/dual row carrier
- ITP T-9 Baja rims
- ITP holeshots all the way around
- GYT-R Jet Kit and Needles
- PEP Steering Stabilizer
- Graydon Nerf Bars
- GYT-R Pro Y Front Bumper
- DG rear Grab Bar
- Rev Box (1,000 over)
- both 12 and 13 Tooth front sprockets
-----------------------------------------------
- Stock front rims and tires 80% tread life on the tires
- Stock Rear rims and tires 80% tread life on the tires
- ITP .190 rims with Turf tamers (rims are a little beat but the tires have 60% tread life)
- Stock shocks (great shape)
- Stock Exhaust
- All the Lights (both headlamps and tail lamp no wires were ever cut)
- Stock Coolant lines
- Spare Carb for parts
- Stock Rev Box
- Stock A-arms (lower left is slightly bent)
- Stock bumper and grab bar (average shape)
************************************************** ***********
1994 300ex set up for woods racing.
- Orange maier plastic with the bolt on front fenders (race or full cut)
- 400ex front A-arms with 400ex shocks
- Pro-Flow Intake
- Yoshumira full system exhaust
- New stock front rims
- Holeshot XC tires (all four)
- Twin wall handlebars
---------------------------------------------------------------
also have:
- Stock A-arms (good shape)
- Stock Shocks (good shape)
- Spare set of Renthal Bars (ATV bend)
- Oury Grips
Will sell both as a package: $5,000
- Blue plastic and Blue Frame, race cut fenders (average shape)
- +2 Burgard chromoly A-arms
- Gibson built triple rate front shocks with rezzy’s
- +1 steering stem, Pro-Taper Handlebars
- Clear high pressure coolant lines
- Pro flow intake with outerwears air box cover
- Yoshumira full system exhaust
- Lonestar axcalibur +4 axle w/dual row carrier
- ITP T-9 Baja rims
- ITP holeshots all the way around
- GYT-R Jet Kit and Needles
- PEP Steering Stabilizer
- Graydon Nerf Bars
- GYT-R Pro Y Front Bumper
- DG rear Grab Bar
- Rev Box (1,000 over)
- both 12 and 13 Tooth front sprockets
-----------------------------------------------
- Stock front rims and tires 80% tread life on the tires
- Stock Rear rims and tires 80% tread life on the tires
- ITP .190 rims with Turf tamers (rims are a little beat but the tires have 60% tread life)
- Stock shocks (great shape)
- Stock Exhaust
- All the Lights (both headlamps and tail lamp no wires were ever cut)
- Stock Coolant lines
- Spare Carb for parts
- Stock Rev Box
- Stock A-arms (lower left is slightly bent)
- Stock bumper and grab bar (average shape)
************************************************** ***********
1994 300ex set up for woods racing.
- Orange maier plastic with the bolt on front fenders (race or full cut)
- 400ex front A-arms with 400ex shocks
- Pro-Flow Intake
- Yoshumira full system exhaust
- New stock front rims
- Holeshot XC tires (all four)
- Twin wall handlebars
---------------------------------------------------------------
also have:
- Stock A-arms (good shape)
- Stock Shocks (good shape)
- Spare set of Renthal Bars (ATV bend)
- Oury Grips
Will sell both as a package: $5,000