crf works connection on trx450r

[beak7707]

Will a crf450 works connections clutch perch/hot start setup work on a trx450r? If it fits will I have to change out any of my cables?

[ZRider400]

you will need a new cable and a few other parts.

www.j-hracing.com sells all that stuff.

[brandonpeake]

im running a crf clutch perch and hot start and stock cables will work clutch is fine its the hotstart that needs modded, but i got a hot start from mark baldwin for the hot start so it was done right, cost about 30 bucks

[beak7707]

So all I will need is the baldwin cable correct?

[brandonpeake]

yes u r correct
tell mark i sent u his way
brandon from 450r.net
he is helping me with the site and will hook u up

[beak7707]

Alright thanks. Anybody know if the new magura hydro clutch has the hot start?

[WhiteZee]

first of all, you do not need the new cable, stock works fine. you just need to make a little spacer for the cable. also, i wouldnt buy the works connection, i have one and im selling it. if i were you, id get the margura hydro. clutch perch and steel braided cable instead, then you can buy a hot start botton that replaces your front brake master cylinder mount. you can get them from works connection, they are on their site.

[jc250r31]

how much you want for the works connection??

[beak7707]

sent you a pm z

[dads400ex]

WhiteZee whats this spacer look like? I have an ASV with hot start and need to get the cable to work or maybe get the Baldwin.

[roughrider01]

Originally posted by WhiteZee
first of all, you do not need the new cable, stock works fine. you just need to make a little spacer for the cable. also, i wouldnt buy the works connection, i have one and im selling it. if i were you, id get the margura hydro. clutch perch and steel braided cable instead, then you can buy a hot start botton that replaces your front brake master cylinder mount. you can get them from works connection, they are on their site.

Thanks for the info!! I was looking for a cheaper way to run the hot start, that brake mount looks like the way to go.

[WhiteZee]

i made a spacer out of a little peice of aluminum and electrical tape.

IMO, the works perch was the biggest waste of money iv spent on my quad. mine broke durring its second race, the little bearing in the lever broke, and now the PC is all scratched off the inside of the perch. you can get a magura hydro. for the same price or maybe even less, which is a much better investment.