need some help

[mikes450r]

hey guys im putting a new clutch and clutch basket in my 250r..i have a couple question...what does the torque need to be on the center black nut...and also the torque on the 5 outside bolts...thanks for the help..mike

[mikes450r]

does the center nut have to be tight or what...cause when i took the old one off i just bent those tabs back and unscrewed it by hand....is the how it supposed to be

I hold the clutch basket with a rag and pop it really quick with a 1/2 impact. I do that a few times. Then I bend the tabs over. The five other screws I just tighten with one hand with a stubby 1/4" drive rachet. You have to have a feel for it or you will break off a bolt.