PDA

View Full Version : help me a bit



liv2hunt
12-15-2004, 08:49 PM
Ok I have installed a HMF slip on, Alba kn adapter with filter, air bix lid and snorkle removed. I have jetted my carb to a mikuni 165 main. 2 turns out on my fuel screw. Now, when I start the quad cold it idels fine. But the fan kicks on in about 5 min. So is that indicating that my piolet is lean. Now, with the quad ideling, if i take and slowly revive the quad up little by little it hits 3/4 good...wide open it slows, so that must mean that im lean. But I took my plug out and lokked at it and it was dark brown. The temp here is 30 deg. and my elevation is 1900'. any tips or advice?

MY450R
12-17-2004, 01:00 PM
are you running aftermarket head pipe?
if so id get one
you may be slightly lean
when did you jet it because it has to be jetted for winter