mike02ex
12-14-2004, 04:29 PM
alright need some help, i just got my bike back togather two days ago, heres some info on the bike:
bored .20 over w/wiesco piston
rebuilt head{new valve seals, 3 angle valve grind
cleaned ports}
open air box w/uni filter
stock exauhst{spelling} w/spark arrest removed-i, know ghetto,
hmf in the mail.
rebuilt the carb, when we put the motor togather.
when i first got the bike togather 2 days ago and started it, purred like a kitten,rode yesterday and ran fine, about 40 deg. f.
outside.
came home today and it was about 30 deg. f.
started the bike w/ the choke on and idled for about 5 min. turned the choke off and it killed it . then i put the choke back on and rode for about 15 mins. with it on and turned it off, killed it.
the motor gets warm/hot so i know its warmed up should i be movin the needle in these temps?, anyone else had this problem?
plese help.:confused:
bored .20 over w/wiesco piston
rebuilt head{new valve seals, 3 angle valve grind
cleaned ports}
open air box w/uni filter
stock exauhst{spelling} w/spark arrest removed-i, know ghetto,
hmf in the mail.
rebuilt the carb, when we put the motor togather.
when i first got the bike togather 2 days ago and started it, purred like a kitten,rode yesterday and ran fine, about 40 deg. f.
outside.
came home today and it was about 30 deg. f.
started the bike w/ the choke on and idled for about 5 min. turned the choke off and it killed it . then i put the choke back on and rode for about 15 mins. with it on and turned it off, killed it.
the motor gets warm/hot so i know its warmed up should i be movin the needle in these temps?, anyone else had this problem?
plese help.:confused: