350r

[350rpowervalve]

My ct 350r power valve has all the time the front in air(sight) that, what is what I could make so that it remains on the ground... to sadden for the faults I am French-speaking

[wilkin250r]

extended swingarm.

You will also need to rebuild or replace rear shock with extended swingarm.

[beerock]

Originally posted by wilkin250r
extended swingarm.

You will also need to rebuild or replace rear shock with extended swingarm.

ditto

[joedirt]

A good set up rear shock will help. It's mainly is your right hand

[beerock]

no shock setup good can over come a powerful motor, so that leaves gearing or swingarm.

IMHO id change the gearing to tame the motor say your running a 14/39 combo id go a 14/38 or a 14/37 it will make the motor more humble at lower rpm hence take away some torque, and a good side affect is more top speed.. This also cost alot less then changing a swingarm to keep the front down

IMHO both 86-87 and 88-89 swingarms are both to long and hurt speed in the whoops. i use a -1 3/4" (from 86-87 length) and it works awesome over the whoops and high speed stability isnt a problem.