PDA

View Full Version : Timing Chain


initall
12-08-2004, 02:56 PM
To change the timing chain. All i have to take off is the side cover cluctch side and the valve cover is this correct?
initall
12-09-2004, 06:53 AM
does anyone know if i have to take anymore stuff off?
cals400ex
12-09-2004, 12:25 PM
you will need to remove the clutch basket to get it in there too. there might be one or two other bolts that need to be removed down there so you can get it on the sprocket in the bottom end. wait, check out the FAQ forum on this site. i think there is a write up on how to do it. for the clutch basket, you will need an impact.
chucked
12-09-2004, 04:02 PM
and the oil pump, get a book on it.
chucked
12-12-2004, 01:01 PM
Originally posted by chucked
and the oil pump, get a book on it.

actually just the oil pump drive gear...
Rico
12-14-2004, 06:54 AM
The cam gear and cam will probably have to be pulled out of the way...

And yes an impact wrench works best on the main clutch nut...:mad:
shep
12-16-2004, 05:12 PM
:bandit: dont forget the camchain tenstioner!!