PDA

View Full Version : Electric Start Problem



DEAL
04-19-2002, 05:08 PM
Well heres the problem
One day i went outside and tried to start my bike , and all i got was a clicking noise , so i looked it over and the noise was coming from the starter sylanoid , so i had it tested and it was gone , so that was fine , then today i went out and bought a new starter sylanoid and hooked it up , same clicking noise, so i took my starter apart and cleaned up the brushes and that stiff won't do it , any ideas?
Thanx.

400exBro
04-19-2002, 05:30 PM
Your battery might be dead. Hook up a multi meter and check if the battery still has all the volts it is suposed to have if not buy a battery.
Bro

crashinmatt
04-19-2002, 05:41 PM
check all ur grounds. especially where the sub-frame bolts to the frame. i had the same problem and i found out that it was the bolts that hold the sub-frame on, it didnt get a good ground thru it.

redzoomer
04-20-2002, 08:48 PM
Yeah better check the charge on yer battery. More than likely that is the culprit to your prob.

Juggalo
04-21-2002, 11:04 AM
yeah dude, my friends warrior was makin that noise and it turns out his battery was shot and he had to run down to farm n fleet and get a new one.

DEAL
04-21-2002, 01:54 PM
Yeah , did he pick up some new 25" tires while he was there too? lol