yoshi jetting help

[Martin Blair]

Well im am ready to put my bike back together with yoshi on their tonight when we got home from turkey day. What needle setting should it go on? I have a uni filter and yoshi full system with no airbox lid, either 3rd or 4th from bottom? Since the carb is baried under the tank I would like to only do this once. Thanks for the help, and happy thanksgiving.

[BOONE450R]

well i have the HRC kit , the clip is in the middle. but im running the HRC lid to, that might change it some:ermm:

[416rider]

My needle is in its stock setting and all I have is the yoshi pipe and k & n air filter and cut airbox lid.

[Martin Blair]

ok i have stock needle and full open lid, so stock or 4th clip some fast help would be nice

[BOONE450R]

whats the main jet?

[BOONE450R]

9 times out of 10 its the middle (3rd) AKA stock setting

[Martin Blair]

im experimenting either 190 or 195 main

[BOONE450R]

i would say middle, 190 will be more like it. i still have the 185 in mine.

[Martin Blair]

i will test it out tommorw, i got the 190 in there and stock needle, but of corse when i took the 178 from the ballance slip on out, just the jet cant come out, but the whole needle seat came falling out the bottom of the carb. So i spent another 30 minutes taking the carb off and putting the whole needle seat back in. Finally got it together cant wait to test it, thanks for the help.

[Jersey450R]

In the cold weather (i mean like 25-35 degrees) you may want to go up a few on the main. for example, if your planing a 185, try a 190 for winter time.