the best banshee pipes

[igota416]

The best pipes for a yamaha banshee is the FMF PHATTIES

[Jersey450R]

no they are not, the toomey t5's are the best out for the banshees so far.

[ledofthezep]

Neither of you have a clue. :rolleyes: My pipes are better than your pipes...:macho Jesus people.:o

[SheeRider]

http://smilies.jeeptalk.org/contrib/edoom/iamwithstupid.gif

I took both my pipes off it gives you 15hp http://www.bansheehq.com/forums/style_emoticons/default/yankyank.gif

[pro_stock_1000]

the best pipes.... to me ....was the toomey T-5 but now they got the toomey T-6...and thats what im going to put on mine.....they say thats the best one,...

[badass250r]

if u go over to banshee hq there all gonna tell u ROCKET pipes are the best

[joedirtay]

any one know how much oil does a banshee hold

[SheeRider]

Originally posted by joedirtay
any one know how much oil does a banshee hold
the banshee is not oil injected...t5's are better with ported motors than the t6's

[zephead400ex]

Originally posted by joedirtay
any one know how much oil does a banshee hold

It's a 2 stroke, you have to mix your oil and gas.

[ledofthezep]

Originally posted by joedirtay
any one know how much oil does a banshee hold

In the case, manual states 1.5qts; I run between 1.5-2qts.;) Mix my gas 40:1 with castor927 & 93oct.



On the pipes...the ignorance of some of these posts are cracking me up. :macho

Pro_Stock...if you plan on leaving your banshee's motor in stock trim other than pipes/jet/filter, then the TR6's are the way to go...if you have any motor mods, then T5's are still your best bet. That's what Toomey claims anyway, don't believe me?--ask them yourself.;)

[pro_stock_1000]

Ledofthezep!!!!thanks for the advise....this summer i will only put pipes and Vforce....i do a lot of trail and fooling around in pits..so i think the best pipes would be the TR-6 right ????

[Kilabanshee]

CPI inframe drag pipes.

[SheeRider]

Originally posted by pro_stock_1000
Ledofthezep!!!!thanks for the advise....this summer i will only put pipes and Vforce....i do a lot of trail and fooling around in pits..so i think the best pipes would be the TR-6 right ????
toomeys are top end pipes...if you want an all around pipe go with fmf FATTYS not PHATTIES

[ledofthezep]

Originally posted by pro_stock_1000
Ledofthezep!!!!thanks for the advise....this summer i will only put pipes and Vforce....i do a lot of trail and fooling around in pits..so i think the best pipes would be the TR-6 right ????

No problem...depends on what you're planning on doing with your quad. I have no complaints on my ProCircuits, they suit my style good. I will never say that any pipes are the best...if you plan on leaving your banshee's motor stock, then according to toomey, the TR6's would be your best bet. If you plan on doing lots of mods to the motor, they say T5's will perform better. If I had the money, I'd be getting som PT mids; have heard very good things about them and would like to try them out for myself. Fatty's wouldn't be a bad choice either--it's up to you man.;)

[pro_stock_1000]

thanks.....