what all are you using for jetting on your 50's???

[QuadJunkies]

We are trying to get a freinds mini quad dialed in for him for this wk ends race and we got him lined up with a WRH pipe clutch and spacers and was wondering what you all are running for jetting?? This is for an Eton Viper 50 :)

[ROBBSRACING]

What carb?

[QuadJunkies]

Originally posted by ROBBSRACING
What carb? sorry, its just a stocker ;)

[QuadJunkies]

we have an Eton but run a dif carb(off a modified pred 90) on our 50 so not sure on the jetting.... :)

[little50]

When I was using the stock carb on my Eton 50cc w/pipe , I had the main jet at #105 w/ K&N air filter.
It started and ran perfect, I think it will depend on if your running with the stock airbox.

[QuadJunkies]

Originally posted by little50
When I was using the stock carb on my Eton 50cc w/pipe , I had the main jet at #105 w/ K&N air filter.
It started and ran perfect, I think it will depend on if your running with the stock airbox. thanks, I think hes jetting around 120 right now Its been VERY cold,temps wer earound 15 degrees the last night we raced. Brandons 70 is now at a 135 and its still lean :huh My Daughters Carb is jetted as far as it will go(we have to order an aftermarket Co. to get jets for it now) I REALLY hate the Carb she has,but funds are low so it will have to make due for now ,it works great its just a pain to get jets .
Basically , on the 50 it runs good except off the line is very slow, sputtery He tired chanign the pilot shich didnt seem to help much I think. Ill find out more on that here shortly ;)

[markvette]

try leaning the needle out one clip and if its better but still sputters try 2 clips.

Mark

[QuadJunkies]

Originally posted by markvette
try leaning the needle out one clip and if its better but still sputters try 2 clips.

Mark thanks we will give it a try.... ;)