a arm berrings....

[theTman]

how do i take them out!!! thanks!!!

[Pappy]

what type of a arm?>

[theTman]

stock lower 400ex

[theTman]

bump

[Pappy]

take off the arm

remove the bushing and sleeves. there isnt anything special to do really. if the sleeve is stuck in the bushing, degrease and lube and push it out

[theTman]

i removed those but what looks like a ball wont come out:confused:

[Pappy]

Originally posted by theTman
i removed those but what looks like a ball wont come out:confused:

its been so long since i saw a stock a arm, id have to look at one to figure out what you are trying to take off:p

[SnowFlake]

im strting to do mine to, do i have to disconnect everything like take the a arm off the spindle and all that crap. Becuse right now i just have the shock off and the a arms bolted off the frame.

[cdalejef]

There is a small C ring on each side of the ball that needs to be taken out with a small pick. Once you get those out you can drive the ball out with an old socket.
Yes, it will be much easier to do with the arm completely off the quad.

[ILGNCC400EX]

i think if you look you can get new a arms with everything in them as cheap as you can rebuild them

[theTman]

Originally posted by ILGNCC400EX
i think if you look you can get new a arms with everything in them as cheap as you can rebuild them

well im not rebuilding...one a arm is bent, the shock mount broke off the arm on the other one

[ILGNCC400EX]

the new armes will have everything in them

[theTman]

how do i get the C clip out!!!!! help me!!!!!

[ILGNCC400EX]

clean all the crap out of the inside.push the bearing to the clip on one side this will let you get a pick in under the other c clip.it aint easy the first time.why are you takin them out

[theTman]

to use on the a arms i ordered

i ordered STOCK a arms from albaaction and they dont come with the berrings

[ILGNCC400EX]

you shure all the new ones i have seen come with them