fall sell out

[Pappy]

Ok here we go.

i am parting out a 426 ex. I will list each part individually with a picture. When the part has sold i will edit the post so hopefully there wont be much confusion.

terms will be paypal or money order.




1st item is a 400ex oil cooler just recoated and looks new. it works fine and has no leaks etc.

$45 shipped

[Pappy]

2nd item is a 400ex thumb throttle assembly. it just recieved a brand new finish and looks as good as new. the unit is disassembled in the picture but will arrive at the buyer ready to install, fully assembled

$45 shipped

[Pappy]

3rd item is a set of motor mounts (400ex) along with the engine spacers. These items are currently awaiting a new finish to be determined by the buyer. once payment is recieved I will powdercoat them any color you would like.

I dont have a picture but we all know what bare engine mounts and spacers look like ...dont we:p

$28 shipped for 2 mounts and the 4 spacers

[XANDADA]

got a front brake master cylinder assembly? I need one for the R if it will function right on my quad. Do you think it will work with the YFZ steel braided lines you sold me? Thanks Pappy...

[Pappy]

4th item will be a complete set of nickle plated Burgard +1 arms. these were installed less then 60 days ago and are in great shape. They will come complete with tie rods and tie rods ends.


$385 shipped


(this is them but i will edit the pic when i get one of just the arms)

[Pappy]

Originally posted by XANDADA
got a front brake master cylinder assembly? I need one for the R if it will function right on my quad. Do you think it will work with the YFZ steel braided lines you sold me? Thanks Pappy...

yes i have one, and it should work without any problems.

$45 shipped?

[TampaBoy813]

Originally posted by Pappy
4th item will be a complete set of nickle plated Burgard +1 arms. these were installed less then 60 days ago and are in great shape. They will come complete with tie rods and tie rods ends.


$385 shipped


(this is them but i will edit the pic when i get one of just the arms)
I just posted my +2 Chrome LSR's for sale So i can get your's...Please Post better pics of them....thanxs

-Paul:chinese:

[Pappy]

TCS tripple rate compression and preload adjustable front shocks, standard travel. these were set up for +2 arms and 180 pound rider MX. they seem to work great and my brother has no complaints with them at all.

i will pc the springs back to stock colors before shipment.

$450 shipped

SHOCKS ARE SOLD

[Pappy]

rear 400ex shock.

this unit was supposedly rebuilt and revalved for 180 pound rider on a stock swing arm. i havent had it apart so i can only go off what i was told when we purchased the quad. same deal, the shock worked fine and does feel alot smoother then a stocker so id bet to say it has been rebuilt


$100 shipped

all parts will be fully washed and cleaned prior to shipment. im not going to blow smoke up your skirt with fancy pics of used parts.

[Pappy]

LSR adjustable axle. chrome finish still looks great and shows no sign of any bends etc.

$280 shipped

[generalg]

Would you take $400 shipped to 67501 for the TCS front shocks?

Are they compression and rebound adjustable?

If so these shocks are sold!!!!!!!!

[Pappy]

built 426 with stage 2 hot cams, 10:8-1 piston. truthfully thats about all i know on it. Haydug built it so i can find any specifics if needed or feel free to conatc him, he will remeber this quad.

i will say that this thing hauls ***:p

$875 shipped complete

we will clean the engine before removal from the frame. its used but cleans up nice.

[JDiablo]

selling the engine how much>?

[Pappy]

Originally posted by generalg
Would you take $400 shipped to 67501 for the TCS front shocks?

Are they compression and rebound adjustable?

If so these shocks are sold!!!!!!!!

yes that would be fine

[Pappy]

frame

i cant find any cracks, but i will look it over before accepting any money. if i find any i will repair them.

bare frame $270 shipped

powdercoated any color $370 shipped

powdercoated and fully gusseted $470 shipped

i will get a better picture of the frame.

(and my bro has orders to report here after work with 2 cans of Gunk and his toothbrush:chinese: )

[generalg]

where do I send the money to? Paypal? Or COD for the shocks?

[CTmxyfz]

Pappy, can i have those bearings and crap out of the swinger or did you already send those other ones you said you were or did???

[Pappy]

Originally posted by CTmxyfz
Pappy, can i have those bearings and crap out of the swinger or did you already send those other ones you said you were or did???

everything should have went out today (im off today)

[EX4me]

What kind of stem does it have?

[Pappy]

Originally posted by EX4me
What kind of stem does it have?

chrome Burgard stem but we are hanging on to it:p

any beadlocks?

[CTmxyfz]

pappy, if you are hanging onto the stem, and selling almost everything else, what do you and your bro have going on here??:confused: :confused:

[the Z Man]

How much for the swing arm? Z

[Pappy]

Originally posted by CTmxyfz
pappy, if you are hanging onto the stem, and selling almost everything else, what do you and your bro have going on here??:confused: :confused:

the stem works perfectly on a 450R with one of Burgard bushings:devil:


he is keeping the beadlocks and tires.

if...IF...i can get the pivot bolt out i geuss $50 on the swing arm?

[Hotdog]

He got an 05,

Pappy, i need a aftermarket bumper?

[Pappy]

Originally posted by Hotdog
He got an 05,

Pappy, i need a aftermarket bumper?

sorry, the 400ex bumper is a direct fit on the R:D

[Hondadudeehhhh]

would you take 350 for a arms?

[Pappy]

Originally posted by Hondadudeehhhh
would you take 350 for a arms?

does it help you if i drop the price:confused: i wouldnt wanna be cutting a rich guy a break:p

350 would be fine

[the Z Man]

Whats the condition of the swing arm,,especially where the caps go by the pivot bolt, pic would be fine to bobcatrojo@aol.com Z

where are you located Pappy?

$350 for the shocks?

[generalg]

I've already got a money order written out to Pappy for the shocks. It is going out tommorrow.

[Pappy]

shocks are sold to generalg

a arms are sold to busch light

[Pappy]

ENGINE IS SOLD

[Pappy]

Bearing Carrier is next...

Burgard billet twin row, 1 race on it so its pretty much like new

$95 shipped

[Pappy]

White Bros slip on...E2 i believe?

was just installed 1 race on it $150 shipped?

[meangreen400ex]

can i see a pic of the white bros pipe? also how much does it normally cost to have a 400ex header pipe ceramic coated?

[Pappy]

i will do my best to get pics this weekend. my bro packed all the stuff up before i got pics of everything:p damn roookie:devil:

anyway, a headpipe is $65 to have ceramic coated

[QuAdEr 317]

i am interested in the thumb throttle. does it have everything you need jus so i can bolt it on n than bolt a throttle cabble on?like the thumb lever and everything?

[the Z Man]

Still interested in the swinger Paps,, Z

[Pappy]

the swinger is done. the right side collar fused itself to the bearing sleeve and after an hour with the air hammer we had to cut her out.



the throttle will come with the cable if you need it, and yes it will be ready to install

[crandles]

How about the start, kill switch assembly.

[Pappy]

im pretty sure the start button was damaged at the last race but ill ask

[250rpilot]

i need a rear brake caliper, hose, and master cyl. whutcha want for it?

[Pappy]

i dunno...maybe like $85 shipped?

[Pappy]

ok, i also have a PRM chassis and swing arm skid. both are in good shape with just the usual scuff marks on the bottom. all mounting hardware is included.

chassis $80 shipped

swing arm (.190) $70 shipped

polished Tinner (GCD) air scoops $30 shipped

also, i didnt get pics but the slip on is a e-series and was used for 1 race and is in new condition.

[250rpilot]

i was thinking 75, whatcha think?

[Pappy]

Originally posted by 250rpilot
i was thinking 75, whatcha think?

i think thats acceptable. pm me with how you wish to pay:scary:

[Xowner]

the tinner air scoops pictures? hard ware to install with ?

[Pappy]

Originally posted by Xowner
the tinner air scoops pictures? hard ware to install with ?

no pics but they are in great shape. all hardware is included.

[Chanman420q]

whats your paypal addy for the air scoops? ill get the money over for thme right now

[Pappy]

u have a pm

[Xowner]

i thought i get some say in if i want them? :eek:

[Chanman420q]

You have money:D

[Pappy]

Originally posted by Xowner
i thought i get some say in if i want them? :eek:

if you want a set they are only a few dollars more for brand new ones and tinner can hook you up. these have been on the quad for maybe a month so i priced them accordingly.

if you have or need me to help get you a set just pm me all your info and ill pass it on to tinner

[Xowner]

yes i do have the money paypal is only a click away so whos are these?

[Pappy]

Chanman420q paid as soon as he made the post.

please dont take it personal, on forums an interested buyer can sometimes take days to respond so you usually go with who has the fastest payment. in this situation both of you guys were neck and neck. now where were ya when the motor was for sale

:p

[Xowner]

ok is that the correct sn for the tinner guy if no let me know the correct name so i can get in contact with him

thanks :ermm:

[Pappy]

yep its Tinner

[Hondadudeehhhh]

i need just a sub frame.... would he sell the sub frame separate? How much?

[Pappy]

the sub has a tweak in it. looks like someone got on the gas a bit too hard. its not bad but its not perfect either. we were going to cut the grab bar off and weld mounts for an aftermarket one.

subframe $35

[haydug]

Throttle, is it sold? If not, I'll take it

[Pappy]

Originally posted by haydug
Throttle, is it sold? If not, I'll take it

oh i still have it, im kinda looking for the damn return spring that mysteriously climbed out of the ziploc baggie and went AWOL:mad:

[haydug]

Let me know, I'll take it. paypal address.

[haydug]

Paid.. :D

[QuAdEr 317]

pic of where subframe is tweaked? and are you welding tabs for an aftermarket grab bar? or it already ahs it?

[Chanman420q]

do u have an antifade lock nut?

[Pappy]

the sub frame is swept upward starting where an aftermarket grab bar would be. i can have it modded but it would be extra of course.


thanks doug..ill send her out

no i dont have an axel nut

[Doibugu2]

Pappy how much would you charge me for the subframe and then put a PRM wide grab bar on it. I don't have anyone that I know of that could weld it for me.

Include with and without powdercoating. I may just have you do that too.

[Pappy]

doug id pc it for free, i will ask what izzy will charge to mod the unit and ofcourse the cost of the grab bar. i geuss ..and this is a geuss youd be looking at around $115 with mods, grab bar and shipping.

[Doibugu2]

could you do like a sparkly red to match the red hipers? I'll take it too. How do you want to work out payment? Paypal works for me.

[Pappy]

yup i can make her all sparly and stuff:p

paypal is fine. i will order the grab bar and get to work on it

[Doibugu2]

Originally posted by Pappy
yup i can make her all sparly and stuff:p

paypal is fine. i will order the grab bar and get to work on it

Just PM me when your ready for payment.

The wide grab bar please. Got that short man's diease.

[Pappy]

no prob on the wide grab bar.

frame and sub are sold.

[CTmxyfz]

Pappy, i have not still recieved those bearings you said you sent out on friday. How did you send them. UPS or USPS seeing that they are a small package. Looking to ride this weekend.:(

[Pappy]

they were sent out via the us priority mail. i havent been at work but they were in the outgoing box. i will go in on my day off to check for you.

btw..any chandce of getting paid?

[CTmxyfz]

How much do i owe you??? Im going to have to send back the the front mudcaps and those clips to you. You said those red clips are coming, so ill send 6 back if there are 12 there. I just can't afford them right now, but still want them. So ill get the rears for now even though i can't afford those either. lol. Quote me for the rear mudcaps and whatever else i owe you.


Thanks.

[Pappy]

when i get in my office ill have to figure it all up again. just keep the mudcaps and send it when you can. i had them sold but wanted you to have them so no big deal really. but please send back the retainers for me.

[generalg]

Pappy, you should have recieved the money order for the shocks yesterday. Please let me know when you have shipped the shocks.

What happened to your number of posts?? It says 1 now.... mmmm


THANKS!

[Pappy]

lol im a newbie:p

shocks are all packaged but havent seen the MO..no biggie because mail dont run today. they should ship out tomarrow as long as i have yer addy:p

[generalg]

I sent my address in with the M.O. I also pm'ed you my address.

[Chanman420q]

Pappy i sent you the money for the burgard bearing carrier as well.

hope to see my scoops and carrier soon:)

[Pappy]

thanks bud

[CTmxyfz]

clips will be sent out monday as i have not even recieved mail or ups crap in 4 days??!?!:confused:

[Pappy]

Originally posted by CTmxyfz
clips will be sent out monday as i have not even recieved mail or ups crap in 4 days??!?!:confused:


dont feel bad, i havent recieved mail since tuesday...lol

[haydug]

Got the throttle today!! Thanks Pappy! (are you really a newbie?) :D

[platinum350]

Will you take $130? If so, where do I paypal money to?

[Pappy]

Originally posted by platinum350
Will you take $130? If so, where do I paypal money to?

no i cant, with only 1 race on it ill hang on to it if i cant get atleast the asking price...damn thing is new...lol

ill keep my eyes open for another one that maybe a little cheaper for ya

[platinum350]

ok, understandable. $150 shipped then? I am assuming it's not bent or anything.

[platinum350]

Also wanted to ask....is this the WB E-series? Is the E2 a different silencer than the E-series. I have seen and read about the E-series and am not sure about the difference between the E2. Thanks.

[Pappy]

150 shipped is fine.

it is a e series...i was mistaken when i stated e2(thats what i had on my 450r lol)

pm me if you want it and ill forward my paypal info

[Rico]

how much fer your airbox????? I only need the airbox not the snorkel or airboot, but if it has to go with it let me know..


send me a PM Paps

[Doibugu2]

Originally posted by Rico
how much fer your airbox????? I only need the airbox not the snorkel or airboot, but if it has to go with it let me know..


send me a PM Paps

Yea, I need one too, if you come accross a stocker.

[Pappy]

i have a complete airbox $27 shipped?

[Chanman420q]

got the parts today pappy, thanks everything looks good

[generalg]

Pappy I didn't recieve the shocks yet. Do you have a tracking number for me?

Thanks

[Pappy]

Originally posted by generalg
Pappy I didn't recieve the shocks yet. Do you have a tracking number for me?

Thanks

i do but its at my work...and im on vacation:(

if i can swing by the office to grab it i will post it for ya.if not i will try and get it off the UPS site.

pappy how much for 2 rear 8 by 8 beadlockjs powdercoated? i live in wv so shipping is cheap.

ah, do u have a black with like chrome flake?

send a pic of that color if you have it to lcadle1880@aol.com

thanks!

[generalg]

Pappy, how about $50 for the rear shock? Is it setup for ZPL?

[Pappy]

the rear shock isnt zps or ssd. it did work realy well tho. $50 is fine

[hondamxerd]

e series, is it just the slip on for the stock header, need one for the wb header, if not
how much, guess it would be s bend

[Pappy]

its just a slip on and it fits the stock header. i wasnt aware WB made 2 different slip on's

[crandles]

Did he take the rear shock? If not I will take it.

[generalg]

I guess I don't need the rear shock. So you can have it. I will look for a SSD or ZPL shock

[crandles]

sent you a pm pappy:D

[hondamxerd]

maybe not a 2 diff slip ons but two diff bends to them the pro meg and s bend, mine is the s bend

[Pappy]

the WB pipe is now sold:)

[Doibugu2]

Originally posted by Pappy
doug id pc it for free, i will ask what izzy will charge to mod the unit and ofcourse the cost of the grab bar. i geuss ..and this is a geuss youd be looking at around $115 with mods, grab bar and shipping.

Pappy, what type of time frame are we looking for this. Not trying to rush you, just need to know when I should start taking my old one off.

Let me know.

Doug

[Doibugu2]

Originally posted by Doibugu2
Pappy, what type of time frame are we looking for this. Not trying to rush you, just need to know when I should start taking my old one off.

Let me know.

Doug

Hello Pappy you alive:D

[Pappy]

i recieved the grab bar today so i can now do up the subframe. i hope to have it completed next week. dont take nuutin apart till i tell you this one is done and on its way:p

[generalg]

Hey Pappy do you still have that rear 400ex shock from the same 400ex I bought the TCS shocks from? I think I need it so it matches the front....

Also any new news on the shock collars yet?

Thanks

[crandles]

Sorry I have the rear shock. It was not valved to match the front shocks anyway. So dont worry about it.

[Pappy]

Originally posted by generalg


Also any new news on the shock collars yet?

Thanks

no but its all my fault. i fired an employee yesterday and for the forseeable future i have to take his position ..what fun:p

anyway, i will take Santo's # and call him from the road tomarrow and see whats up

[generalg]

Thanks Pappy and thanks crandles for being honest.

Just keep me informed.

[Doibugu2]

Originally posted by Pappy
i recieved the grab bar today so i can now do up the subframe. i hope to have it completed next week. dont take nuutin apart till i tell you this one is done and on its way:p

Okay just checking. THought you might have just forgot about it or sold it. Cool:cool: