450r,250r,300ex,250x parts f.s.

[ms250r]

-450r A-arms- 2 sets (uppers and lowers)
-450r Swing-arm
-450r front shocks
-450r Rear shock
-450r stock cam
-450r throttle cover(will fit 400ex, and maybe 300ex/250x)
-450r stock complete exhaust with the core removed & hrc billet end cap.
-450r HRC end cap-#18317-nlz-650 (still in package)
-450r HRC 2" ring-#18292-mv4-000 (still in package)
-450r HRC screws(2)-#93901-25420(still in package)
-450r HRC washers(2)-#94103-05800(still in package)
-450r HRC needle & clip-#16201-nlz-651
-450r stock "T" tube(I dont know what its called but it was replaced by HRC tube-#15771-nlz-650
-450r stock handlebars
-450r clutch perch & lever w/e brake lever
-450r stock swing arm skid plate.
-450r stock engine skid plate.
-450r brake light cable (attaches to foot pedal)
-400ex stock axle
-400ex Hetrick muffler, cut shorter
-K&N precharger, red (300ex,250x) may fit others
-kill switch, (red)
-Smith dual wrap/dual density grips (for twist) still in package
-250r K&N air filter.
-34mm keihin carb.
-400ex stock header with heat shield.
-400ex rear hubs(red)
-400ex foot pegs
-steering stabilizer brackets
-400ex clutch lever/perch w/e-brake lever
-400ex rear tail light
-400ex handlebar plastic cover (yellow)
-400ex airbox snorkel
-400ex stock case saver/cover
-400ex stock front bumper
-250r nerf bars, w/red nets
-250r TT style maier front fenders(with built in radiator scoops) and vented hood (red)
-250r maier rear fenders (red)
-250x/300ex cut front fenders (grey)
-250r stock front shocks
-250r stock axle
-250r clutch cable
-250x/300ex stock axle
-250x/300ex stock head pipe
-250r kick starter
-TAG fat bar pad (grey & black)
-red moose shock covers
-black outerwear shock covers
-banjo bolt(anodized red) new still in box
-Moose std. handlebars (without crossbar)
-stock handle bars

if u have any questions or interested in anything just post, or u can pm me. You can make an offer on any thing here or i can give u a price. (adding new parts all the time) If u need something that i dont have listed you can get ahold of me to see if i have it or i could get it for u.
thanks, mike

[m250r]

how much for just the Pro Circuit header? I already have the exhaust. Nice sn by the way:D

[buster369]

if hes interested in the header i'd be really interested in the muffler. let me know iwth a price thanks

[Jwarren879]

Can I get pics of these:

-250x/300ex full left & right front fenders (grey)
-250x/300ex rear fenders (red)

and PM me with a price for them shipped to 60240 IL. I'll make an offer of $50 shipped right now if they are in good shape with no cracks (zip ties, etc.).

[ms250r]

Hey guys i have someone interested in the pro cuircut exhaust as a whole, but if it dont go through i will let you guys know.

thanks

[ms250r]

yeah i will try to get pics of them within the next day or so and i will also figure out how much it will cost for shipping.
thanks

[BigDaddyCMU]

How much for the black 250r headstay shipped to 48062?

[ms250r]

I will take $5 for the head stay and try to get a price on shipping.
thanks

[ms250r]

The White Brothers slip-on, and Pro-cuircut race exhaust are sold.

[sparks27]

How much for the 300ex cut fenders with hood?

[ms250r]

i will take $35 + shipping for the fenders and hood.

[ms250r]

-Full front fenders, grey, 250x,300ex - SOLD-
-Rear fenders, red, 250x,300ex -SOLD-

[ms250r]

-Engine mounts,PC silvervein,new -SOLD-
-Head stay, new, PC silvervein -SOLD-
-Front wheel collars, new -SOLD-

[ms250r]

Front douglas rims and tires -SOLD-

[dirtmomma]

Is the carb a flatslide?? How much for it, & is it ALL there??? Shipped to 98205 :) thanks

[ms250r]

Yeah its a flatslide carb. everything is there for it. the guy i got my 250r off of ran nationals and had bought this one and another one(both the same carb) but i never used this one i always just used the one on the quad. but he was switching between the two so it is used some. I can send ya some pics of it if u are interested, it would probably take a day or two to get the pics. If u are interested how about $75 and i will find out how much shipping is for it. thanks

[ms250r]

Added new parts to list.
Also if any one needs any parts that i don't have listed for the 450r,250r,400ex,300ex, or 250x u can get ahold of me and i will see if i could get them for you.
thanks:D

[C41Xracer]

claen out your mail box

[ms250r]

Alright, cleaned out;)

[skippy1999]

i got my parts from this guy.. and they were GREAT... nice quick service and good parts!! A+

[ms250r]

thanks skippy:D

[ATC600X]

how much for the axle(and hubs and lock nut if you have em) shipped to NJ?
Thanks

[ms250r]

for what bike, 250r?

[ATC600X]

oh sorry forgot that part the 300ex

[ms250r]

i have a 300ex axle
a 250r lock-nut(dont know for sure if that will work or not)
but i dont have any hubs right now.

[ATC600X]

so how much shipped to new jersey?

[ms250r]

I will try to figure out monday how much shipping will be.
What about $40 for axle
$15 for lock-nut
I will write back with the total including price of shipping (hopefully later today)
thanks

[ms250r]

New Parts added.


Sorry about not posting shipping price for axle monday, (been really busy. I'll get it done for u though.

[skippy1999]

maybe you can condense yr ad and just list what you have? i need/want more r parts.. thx

[hondaman09]

how much for the 300ex fender supports?

[ms250r]

I will work on eliminating stuff;)

The price of the fender supports dont really matter, um $5 + shipping, tell me what u think

[skippy1999]

250r foot pegs, (silver vein powder coat)
--250R engine head stay, is used and black
-250r rear rotor hub
-250r axle nut
---banjo bolt(anodized red) new still in box
-honda rear sprocket bolts and nuts
-honda axle/hub nuts

whatz a banjo bolt? what year are the pegs for? prices?

yr pm's are full.. email me about these.. thx skippy3@erols.com

[ms250r]

hey skippy, my email is not sending things out from this computer.
so i am going to put them on here.
-foot pegs- $20, for an 86
-250r engine head stay(sorry, when i was looking through my parts i seen that i had only one head stay and two rear engine mounts, i think someone was interested in this but they never sent money so i will see if they are still buying or what.)So its the rear engine mount that i have - $5
-250r rotor hub-$8
-250r axle nut-$8
-bango bolt-$3, paid almost 9 for it, But the bango bolt is the bolt that holds the brake line to ur front brake master cylinder or the bolt that holds ur brake line to ur caliper(its got a hole in the threaded area so fluid goes through)
-sprocket bolts and nuts-$1
-axle/hub nuts-$3

but if u got all of these together i could give u a better deal, we could work something out.;)
write back and tell me what u think, thanks

[ms250r]

HEY BigDaddyCMU
IF U SEE THIS I LEFT U A PM ABOUT THE HEAD STAY, IF U COULD GET BACK TO ME. THANKS

[the Z Man]

I need an 88 89 style headlight , let me know please

[ms250r]

250R?
IF SO I DONT HAVE ONE RIGHT NOW, I COULD CHECK AROUND FOR U THOUGH.
I WILL LET U KNOW IF I FIND ANYTHING.
THANKS, MIKE

[ms250r]

-accerbis rally II handgaurds & mounting kit (silver and black)
-400ex axle

[ms250r]

just added more to list

[ms250r]

THE Z-MAN
HAVENT CAME UP WITH A HEADLIGHT YET. SORRY
I WILL KEEP AN EYE OUT FOR ONE THOUGH

[Xowner]

Originally posted by ms250r
-Accerbis Rally II handgaurds & mounting kit, (silver/black)

--banjo bolt(anodized red) new still in box



prices and pics jpsshack@fuse.net

[ms250r]

FOR THE BANGO BOLT $2, (NEW IT WAS 8.75)
AND FOR THE HAND GAURDS SOMEONE JUST WROTE ME AND SAID THEY WANTED THEM, I WILL FIND OUT FOR SURE AND THEN LET U KNOW.
I WILL GET PICS OF THEM FOR U THOUGH.
THANKS, MIKE

[Xowner]

ill take the banjo bolt you take paypal? whats shipping gonna cost 37 cents for stamp?

thanks

[ms250r]

ALRIGHT,
DO U STILL WANT A PIC OF THE BOLT?
DON'T WORRY ABOUT SHIPPING. I WILL COVER IT.

[ms250r]

OH SORRY,
NO I DON'T HAVE PAY-PAL

[ms250r]

EVERYONE JUST SENDS MONEY ORDERS, THAT SEEMS TO BE THE EASIEST WAY.
THANKS, MIKE

[Xowner]

umm i think you was gonna send me pics of the hand gaurds i got a email but there was no pictures in it . do the banjo bolt got the washers with it?

Thanks

[ms250r]

NO I DIDNT SEND U ANYTHING YET, SORRY. I WAS WAITING TO SEE IF THE OTHER GUY WANTED THE HANDGAURDS. BUT HE DONT NEED THEM NOW. THE BANGO BOLT HAS THE TWO WASHERS IN THE PACK WITH IT. I CAN SEND U PICS OF THE HANDGAURDS NOW. (NORMALLY I SEND THE PICS THROUGH E-MAIL BUT MY MAIL IS NOT SENDING THINGS OUT SO I AM GOING TO JUST PUT THE PICS ON HERE.
THANKS, MIKE

[ms250r]

HERE ARE TWO PICS. IF U WANT BETTER PICS OF THEM OFF THE BIKE JUST LET ME KNOW. (AND I DONT HAVE ANY PICS OF THE BANGO BOLT RIGHT NOW BUT I CAN GET SOME IF U WOULD LIKE)

http://www.imagestation.com/picture/sraid149/p11212969ca3d878e09ee9a4c792674ab/f608936c.jpg

http://www.imagestation.com/picture/sraid149/pb4b192cebe606e6d9bc8c3efc2780776/f60890fe.jpg

THERE U ARE
THANKS, MIKE

[LT250Racer609]

i want the handguards lol

[ms250r]

NO LT250 MAN, U CANT HAVE THEM!
HAHA
JK

[the Z Man]

How much for those AWESOME hand guards??? I have the LakersSilver plastic!!

[Xowner]

i have frist dibs on them and how much are they ?

lol

[LT250Racer609]

mike i paid 90$ for them so dont go to cheap.....i say 70$ with mounting kit

[ms250r]

Xowner- how much are u willing to pay? and if i think its to low then i will let "the Z man" make an offer.
will that work?
thanks guys,
mike

[Xowner]

no i just bought s new set of red powermadds let z have'em he is a good man

[ms250r]

hey "the Z man", if u are still interested u can make me a offer.
thanks, mike

[LT250Racer609]

mike im good...im just gonna get the same handguards in black for the 250R along with a Black quad tech hood scoop and black quad tech gas tank cover...and blue hyper rims all the way around...i will post pics of it when im done

[ms250r]

hey lt250r, why u puttin black on the bike for?
haha
stick with the blue and red
just messin around with u,
the blue hypers will look sick, i was gonna get the red quad tech hood with scoop for that bike. :)

[the Z Man]

Hows 25 shipped sound??? They sure are sharp!!! Z.

[LT250Racer609]

hell i will buy them back for 25....i paid 90 for them!!

[ms250r]

SORRY Z, I CANT GO THAT LOW.
THEY STILL ARE IN REALLY GOOD CONDITION.
THEY ARE THE STRONGEST PLASTIC HANDGAURDS U CAN GET.
(THE ONLY REASON I AM GETTING RID OF THEM IS BECAUSE THEY DONT GO ALONG WITH THE COLOR SCHEME I AM GOING WITH) ;)
IF U ARE STILL INTERESTED, WHAT ABOUT 50 AND I WILL PAY SHIPPING?

[ms250r]

"the Z man", I WAS JUST WONDERING IF U ARE INTERESTED IN THEM STILL? WE CAN WORK SOMETHING OUT IF U ARE. GET AHOLD OF ME, THANKS, ,MIKE

[ms250r]

Xowner- I WAS WONDERING IF U ARE STILL WANTING THE BANGO BOLT?

[the Z Man]

Does that include the mounts? and are those fat bar mounts??? Z, still interested....

[LexusIS300]

Do you have a complete swing arm for a 300ex. I dont really need the swing arm, but i need everything else, ie... axle, bearings, carrier, rotor hub, drive hub......so on

[440exnacsracer]

how much for stock front shocks? pics? spring color? thx
Ben

[ms250r]

"the Z man", THEY COME WITH THE MOUNTS, NO THEY ARE NOT FOR FAT BARS, THEY ARE FOR STD. HANDLEBARS.
MIKE SHULL
P.O. BOX 205
WALNUT CREEK, OH
44687

THATS FOR IF U SEND THE MONEY FOR THE BANGO BOLT.
THANKS, MIKE

[ms250r]

LexusIS300- I ONLY HAVE THE AXLE, IF U ARE INTERESTED I CAN GET U A PIC, U CAN MAKE AN OFFER.

440exnacsracer- SHOCKS FOR WHAT BIKE, 400EX? I HAVE FRONT SHOCKS FOR THE 250R, BUT IF IT IS FOR THE 400EX I COULD CHECK AROUND FOR U, AND LET U KNOW IF I COULD GET U A PAIR.
THANKS, MIKE

[440exnacsracer]

they are the same shocks, so whether they are for a r or ex, it doesnt matter, but ex shocks would be nice, because, in most cases, obviously they would be in better condition. thanks
Ben

[ms250r]

I WILL WORK ON SENDING U PICS OF THE 250R SHOCKS THIS WEEKEND, AND I WILL ALSO ASK AROUND ABOUT SOME NEWER EX SHOCKS THIS WEEKEND.

[the Z Man]

How much are you looking to get out of those hand guards... Z

[priebo15]

still got those handguards?? might be interested if z doesnt want them

[ms250r]

UMM, $45, IF SHIPPING IS MORE THEN 10 BUCKS I CAN COVER SHIPPING COST. TELL ME WHAT U THINK

[ms250r]

OH YEAH, PRIEBO, I WILL LET U KNOW IF HE IS GONNA GET THEM
THANKS, MIKE

[Xowner]

ms250R yah i want it still pm me your info i just forgot

Thanks

[ms250r]

Xowner- SENT U A PM

[ms250r]

i took some pics of my shocks but have to go over to my gf's house to upload them, i still want to get a hold of my buddy, i think he might have newer 400ex shocks. i will try to get the pics up in the next day or so and also talk to him.
thanks, mike

[spr-scott]

I'm looking for a 450r headlight w/ mounting brackets.

[ms250r]

Yeah i have the headlight and mounting brackets
i can take pics of it today and try to upload them later on today.
then u can make an offer, or i can give u price.
thanks, mike

[ms250r]

i sent u a pm

[ms250r]

400exnacsracer
Z man
seen that both of u couldnt send me message because mail box was full, i cleaned it out, so if u want u can send the messages again.
thanks. mike

[ms250r]

just added alot of parts, mostly 400ex stuff.
check it out

[dsheola]

Black Outwears shock covers 400ex
Price?
new or used?
pics?
wannagobigex@yahoo.com

shipping cost to 07853

[ms250r]

They are used, but nothing wrong with them. i will take pics of them and try to send them out to u within a day or two. Um what about $8 and i will pay shipping, sound good?

[dsheola]

send me some pics and consider them sold

[ms250r]

Alright, thanks.
I took pics of them, just need to go over to gf's place to upload them.
mike

pics of plastic exracer0@yahoo.com

[ms250r]

fenders for what quad?

[ms250r]

hey man, sorry about the wait. I just got my electric back on, it was out for 6 days strait. so i will send u the pics in the next day or so. thanks
mike

300ex plastic with grey hood

[ms250r]

Hey exracer0, my e-mail dont work from this computer.
So i am going to post them on here.

http://www.imagestation.com/picture/sraid147/p00bc9c48b8b45cebddc529ed5edf5ee7/f628e382.jpg

There are some zip ties in some of the spots(where some of those little tabs broke, but overall they look pretty good.
thanks,
mike

[ms250r]

hey, got a pic for u, here ya go.

http://www.imagestation.com/picture/sraid152/pd6efcf1e9dc138177e2274044f7023a7/f5b6ce7e.jpg

let me know what u think. (kinda dirty, but i will clean them before sending them out.

[Kilabanshee]

Are the hand guards still available what are the condition? Any pictures? I didnot get a chacne to look through every page soo I'm not sure if they are sold if not how much would you like?
Thanks alot,
Brent

[ms250r]

YEAH I STILL HAVE THE HANDGAURDS FOR SALE, I HAVE HAD ALOT OF PEOPLE INTERESTED AND WANTED THEM, BUT NOBODY HAS BOUGHT THEM. $45 IS THE PRICE THAT EVERYONE SEEMS TO BE TALKIN ABOUT. LET ME KNOW WHAT U THINK. (I HAVE A COUPLE PICS POSTED ON HERE. COUPLE PAGES BACK IF U WANT TO SEE THEM.) THANKS,
MIKE

[Cody_300ex]

How much for JUST the two fenders. i dont want the hood or any of that.

[ms250r]

The one side (oppisite of the fuel on/off switch) the mounting tab area is cracked off. But i had it mounted to my quad and never had a problem with it floppin around.
So if u are still interested u can make an offer or i will make a price.

[dsheola]

do you have the rear one too?

[Cody_300ex]

could you do 65 shipped? Also to save on shipping costs you can just suran wrap instead of putting in a box or neaither for what Im gunna be using them for. :)

[ms250r]

yeah i could do that.:)

[ms250r]

no, sorry dont have the rear one

[yfz450admirer]

Mike,
Your mail box is full so I posted here.

I just mailed your money order for the hand guards. How much do you want for your Moose shockwears? Do you have all 3? Your 450R looks sick!!
Later,
Brad

[ms250r]

sorry about the mail box, i will clean it out.
Thanks for sending the money out, I'll have the handgaurds ready to send out.
I dont have the rear shock cover, and i have a couple other people interested in the shock covers but nobody has sent money yet, atleast i dont think so anyways. I have told everyone $8 for the shock covers.
(thanks for the compliment on the 450r, its gonna be completly changed up soon :D )

[dsheola]

paypal for the shock covers?
we said 8 shipped right?

[ms250r]

yeah, $8 shipped.
I never did pay pal. just money orders.
thanks

[dsheola]

pm me your address and i'll send it out

[ms250r]

alright, sending u a PM
thanks!

[2001Toomey]

I'm interested in the 34mm PJ. I'm thinking that $40 shipped is possible. Brand new, they're about $120. Tell me what you think.
I don't need the cable or intake boot or anything.

[ms250r]

Um, I dont think i can go that low, new this was like a $200-250 carb.
I can send u a pic, but right now imagestation is down at the moment.

[ms250r]

Oh, sorry,
i forgot to mention a price. (someone offered me $75 for it a little while back, if u could afford something around that i would consider it
thanks,
mike

[ms250r]

NEW PARTS ADDED TO LIST

[Xowner]

hey did i ever send that money for the banjo bolt i cant remenber?

if i didnt let me know also how much is the sparks cam?

[ms250r]

Nope, i never got money from u then, i just figured u didnt want it anymore, but yeah i still have it if u want it.
Um i bought the sparks cam off of a guy that was testing some cams, he only used it for a short amount of time for comparisons, then i bought it off him and never installed it.
I bought it for $150, so i would like to get that out of it.
thanks Xowner,
mike

[ms250r]

Hey man finally able to post pics. Here is a pic of the carb (not the best pic)

http://www.imagestation.com/picture/sraid147/p9d893788f722f21c466f92604178cebe/f628f2a9.jpg

[ms250r]

hey I was just wondering if u were still interested in the fenders?
just let me know,
thanks,
mike

[LT250Racer609]

2001Toomey


i have a 34MM Pj carb..the same one ms250r is talkin about...i will let it go for 65$ shipped if you are still interested...

[fasterblaster09]

how much for the 300ex front fenders?

[ms250r]

The other guy offered $65 shipped.
I dont know if u seen the pics on here for them or not, but its the grey left/right fenders and the red middle piece, the grey hood was taken off and sold.

[ms250r]

BUNCH OF PARTS SOLD AND NEW ONES ADDED.

[XANDADA]

looking for 250r front brake master cylinder. If available and in good condition please shoot me a price, thanks...

[engle_andrew]

i live in alabama how could i get the 450 r shoks from u i got no credit card let me know something bro

[ms250r]

XANDADA- I did have 2 rebuilt front master cylinders, but just got rid of them a little while back, sorry. (I got rid of about 90% of my 250r parts)

engle_andrew- everyone sends money orders, My new PEP's are not in yet so I wouldn't be able to get rid of mine just yet, but i might be able to get a pair of brand new 05's off of my sponsor.
Let me check, i know a couple other people were wanting his shocks. If he still has them i will check on a price too.

thanks alot guys,
mike

[ms250r]

Cleared out inbox, everyone that tryed to send me a private message sorry about that and please re-send me a message. thanks alot,
mike

[ms250r]

Here is the pic u wanted.
http://www.imagestation.com/picture/sraid156/p3b4c88881bdb72964947002316350fe5/f54d5a28.jpg

Let me know what u think,
thanks,
mike

[ms250r]

Bunch of new parts added to list.

[ms250r]

ADDED MORE PARTS TO LIST

[Cody_300ex]

Do you have a 250r hood I could buy??

[ms250r]

sorry, I dont have a hood.

[polaris bob]

sent you a PM

[dads400ex]

Your mail box needs emptied:D

[MX#9]

Need a price on the clutch perch and lever shipped to 16214 zip code(PA). Also,do you have a 450r headlight assy.?
Are the a-arms new take offs or are they used?

[hardbodyt]

how much for bar pad

[ufd2300ex]

need 300ex brake stay and sprocket hub..???..tried to pm you...your box is full

[koschak]

do you still have the 450r front shocks? I'll send you $180 for them? e-mail me please. koschak3@hotmail.com

[lsr88r]

Your box is full

:D

[koschak]

its empty now. try again...thanks
:devil:

[koschak]

my email is empty. what is the pm box?

[ctorch]

do you have any 400ex exhaust for sale
if so send some pics ctorchen@hotmail.com

[knight rider]

how much for the 250r nerfs ( are they pro peg)

[priebo15]

Originally posted by ms250r
--

-kill switch, (red)

-250x/300ex cut front fenders (grey)

if u have any questions or interested in anything just post, or u can pm me. You can make an offer on any thing here or i can give u a price. (adding new parts all the time) If u need something that i dont have listed you can get ahold of me to see if i have it or i could get it for u.
thanks, mike

do you have a pictures, and a shipped price for each? thanks

[jrspawn]

Please email me at jrspawn@aol.com about the steering stabalizer brackets. Which bracket are they, for what type stabilizer? And what type of quad.

thank you
justin

[blairdl]

Do you still have the red moose shock covers........am interested!

[Custom-Covers]

How much for the 300ex axle? Thanks Ashley