What parts will swap to a 300ex?

[jermill79]

I have a 300ex and can anyone tell me which part from different quads can i swap parts such as 400ex a-arm ect and do you think it will do my 300ex good to swap these parts?

[atvridernc]

i know 400ex a-arms fit a 300ex but then you have to buy one of those shock mounts off ebay that look kinda sketchy.

[gratzracing24]

Someone on here made a shock mount relocator for me i forget who but it worked great so i have the 400ex front end and i think someone said the axle will work too but im not sure on that so check with some others on that

[YFZ450Ridr]

some guys on here told me that a rear raptor shock will bolt right up to a 300ex no questions asked.

[TheX1992]

I put a 350X rear shock on my 250x. Hardly any travel but it's real stiff. I had a problem bottoming out so it was what I wanted (trail riding, no MX). It needed a bit of work to make it fit, but it's possible.

I hear the 250r a-arms and shocks will also work. I don't think you need the upper shock mount relocator with the 250r setup too.

[kicken250x]

Originally posted by 250EXridr
some guys on here told me that a rear raptor shock will bolt right up to a 300ex no questions asked.

the old one (01? i think?) with the remote rezzy will bolt up with no mods at all but the spring may be too stiff if you are under about 190 maybe more so most people switch to a 400 spring and they are supposed to be great

[dirtmomma]

Well here we go......................front/rear sprockets, tires/wheels,front brakes/pads, carb :), front bumpers w/ a little help, there is some other stuff to but can't remember right off hand

[bradley300]

400ex a-arms will fit,but they dont work as well as 300ex a-arms

[ThumPIN_450R]

a 350X motor is supposed to go in some what easy:macho