97 300ex modded moderatly

[c0wb0y300ex]

97 300ex FOR SALE or maybe trade. i have put a ton of time and money into this thing and i really hate to see it go but i think its time to upgrade, to a sled (seeing as i live in maine). Anyway, i have owned this Ex for going on 3 years now and it has a prety good list of upgrades and mods.
-professionally ported/pollished head
-new OEM axle
-lonestar bearing carrier with bearings
-DID chain and sprockets, 12, 13, 14 front, 38 rear
-20x11x9 fast trecker rear tires (mounted currently)
-22x11x9 mudbuster rear tires
-21x9x10 stock blaster fronts
-cobra megaphone full exhaust
-jetted carb (currently a 140 main with a 40 pilot)
-extra 130 jet for summer and stock 122
-uni air filter
-EBC heavy duty clutch and springs (have stocks for spares)
this thing has never been raced and i have friends that say they have seen ken ride barbie harder than i ride my Ex. 99% of the hours on this bike have been trails. oh i always used Castrol GTX motor oil

$1800

[#2racer]

I have a 1986 S-10 blazer for sale or trade for a quad. it has a 350 bored .030 over with edelbrock victor jr. intake and a edelbrock 600 carb. It has heddman headers with turbo mufflers and M/T valve covers. Has a new starter and various chrome on the engine such as water pump, alternator, and other common chrome stuff. It has a Th350 tranny with a shift kit and a Hurst V-Matic 2 shifter. It needs most of the stuff for the front of the motor like pulleys, radiator mounts, belts, hoses, and an alternator bracket to run. I bought an 88 corvette rad for it but never put it in. It is lowered 3/4 with cut coils up front and blocks and leafs taken out in back. It has camaro wheels with new kumho ecsta supra tires. I started to french the license plate in the tailgate but havent finished. Its prolly 90% done. I bought a roll pan for it but never put on. The doors are shaved and primered. The interior is in good shape but the doorpanels were taken off to shave doors along with the windows. My email is KHE_88_00@hotmail.com or you can pm me. Im asking 2500 obo. I am located in southeast iowa. I would also like to trade for a quad. Something like a mid to late 90s 300ex or rancher or something along them lines. Needs to be in good shape and run good to. I think thats about all I can say bout the blazer. If bought buyer either takes care of shipping or comes and picks up. If around the St. Louis area I could prolly meet half way or so.Heres some pics from awhile ago but still looks basically the same.

engine http://www.blazinlow.com/forum/atta...p;postid=266614

door http://www.blazinlow.com/forum/atta...p;postid=257735

tailgate...its closer to bein done then in this pic but not much http://www.blazinlow.com/forum/atta...p;postid=257745

interior http://www.blazinlow.com/forum/atta...p;postid=257755

pic of old wheels and before shaving and such http://www.blazinlow.com/forum/atta...p;postid=243287