need help with removing my key

[jasson#69]

unplug my key and now my temp light doent work what to do to fix it?

Cut the connector off of the key switch. Splice the red and black wires together and pug it back in. The other 2 wires are green and black with a white stripe. Make sure you don't confuse the black with the black with a white stripe. Not only will the temp light not work but, neither will your fan, lights or carb heater. If you install a kill switch, all you have to do is hook it up to the other 2 wires (green and black with a white stripe). It doesn't matter which wire goes were if you hook up a kill switch.