where can i get a vavle clearnance tool from>?

[JDiablo]

just as it says...i cant seem to find it on ebay,so where would i be able to find one?

[fastkid400]

its just a set of feeler gauges u can get at any auto store
http://www.jcwhitney.com/webapp/wcs/stores/servlet/ProductDisplay?productId=563&catalogId=10101&storeId=10101&langId=-1&TID=100

[turnandburn]

buy the straight ones and bend em or buy the bent feeler gauges and set your valfs.:)

[lil400exman]

when you set them,set them so the feeler gauges are "tight" in the valve. This will give you the most accurate reading. :D i had mine loose and it ran worse then before i did it.... so i did it again, did the above way it ran mucho better.......fyi....also get a FSM (factory service manual) if you dont have one already.....it will be the best mod for your sanity and your machine:cool:

[Pappy]

you can buy one from honda that has the correct measurements for a stock 400ex. they are like $5 and work great.

i probably have a new one laying around if you need it. we use a different set since we work with aftermarket cams etc

[JDiablo]

Originally posted by Pappy
you can buy one from honda that has the correct measurements for a stock 400ex. they are like $5 and work great.

i probably have a new one laying around if you need it. we use a different set since we work with aftermarket cams etc

yea if you have one....if you have one that you use for hotcames on a 400,that would be sweet too