250EX complete part out!!! lots of stock and aftermarket parts!!!

[JABracing#7]

The engine blew so i'm parting it out.... its a 2002 250ex yellow. Any stock parts you might be interested in that is not listed just email me because chances are i have it so let me know.
***Everything listed is OBO any reasonable offer considered***
Also I have pictures of everything so email me if you would like to see any!

stock rims with ITP holeshot XCTs on the rear (22x11x9) and Maxxis Razrs on the front(22x7x10) all tires have good amount of tred left email me for pictures-
fronts- $125
rears- $125
both- $200

durablue ez-fit wheel spacers- all 4 for $100
dg front bumper- $50
dg rear grab bar- $30
k&n air filter- $20
moose racing handle bars and honda racing bar pad- $25
acerbis handguards*red- $25
pro design kill switch- $20
stock seat w/ ceet flame seat cover- $75
dg nerf bars (need netting)- $20 SOLD
big gun full exh. *race series*- $175

stock parts:
shifter- $5
footpegs- $10
steering stem- $40
front disc brakes- $75
full plastics racing cut- $125
full carb/ throttle- $50
battery- $25
frame- $250
air box- $15
hubs (all 4)- $50
axle- $45
rear shock- $50
front shocks- $75
swing arm/ drivetrain/ rear brake- $100
a-arms/ tie rods- $50
tank- $50
head light
tail light
air duct
ect...

The engine blew because it ran with no oil and just burnt out if anyone is interested in what is left of the full engine let me know becuase I will sell it for cheap Thanks!

[JABracing#7]

bump... how do you post pictures anyways?:confused:

[JR3]

send em to me ill post em for ya i know how it was when i sold my 250 lizard5353@aol.com

[JABracing#7]

sent you an email. Thanks! :D

[JR3]

nice bike i miss my 250 now lol they are fun lil bikes http://img.photobucket.com/albums/v367/250ex3/P1010275.jpg

[Xowner]

will the hand guard fit a 450R? also some close up pics so i see how they mount?

Thanks jpsshack@fuse.net

[Lordlindsey]

I need the LF Knuckle and LF outer tie rod.
How much?

Shoot me an email.
glindsey@core.com

[JABracing#7]

emails sent :blah:

[cpaul]

Sent you an email..........please check!

[JABracing#7]

cpaul

i dont think i got your email... whats your email address and what are you interested in??? let me know
thanks

[cpaul]

address is cpaul@ssg.petsmart.com
I am definitely interested in the flamed seat cover, kill switch, and front bumper.
Also may be interested in the wheel spacers.
Please email pics of all to the e address above.

I will pm you my phone number so we can work out details.
Thanks!

[fastmofo]

interested in kill switch, what color? and is that $20 shipped? Pm me if you still have it, thanks

[JABracing#7]

C paul are you interested in jus the seat cover or the whole seat??? Also when I get hoem I will send you pics of the parts.

fastmofo the kill switch is red... $25 shipped? let me know

thanks

[JABracing#7]

parts still for sale!

[SCOTTS450R]

I'm interested in the pipe and sent you a pm. Can you send pic's to me of big gun pipe? Thanks!!

[JABracing#7]

scotts450r sent you a pm
thanks

[Jwarren879]

sent you a pm

[JABracing#7]

bump

[JDAWG74]

i need a rear axle for my nephews 250ex. is the axle straight?
how much shipped to bessemer city, North Carolina? my e-mail
is revin247@aol.com

[JABracing#7]

email being sent right now JDAWG

thanks

[JABracing#7]

bump :rolleyes:

[moto93]

How about $10 for the dg rear bar?

[JABracing#7]

25 shipped for the grab bar

[JABracing#7]

bump

[JABracing#7]

bump

[JABracing#7]

bump :macho

[moto93]

Originally posted by JABracing#7
25 shipped for the grab bar


I'll go $15 shipped.

[JABracing#7]

$20 shipped its yours

[JABracing#7]

email sent

[JABracing#7]

sending it now thanks

[moto93]

Got the pic, thanks. If you'll let it go for $15 OK, if not I'll pass.

[JABracing#7]

20 is the cheapest sorry

[moto93]

If you change your mind let me know.

Thanks,
SMC

[JABracing#7]

same to you thanks

[JABracing#7]

bump :eek2:

[JABracing#7]

bump :rolleyes:

[JABracing#7]

bump

[sammy5x]

I will take the front and rear tires and rims if they are good. I live in northern MA. PM me for personal info and we can set up a time and place.

[250EXking]

off the topic ?, but how did u blow the motor on that thing. just wandering.?

[honda rida]

He ran it with no oil:ermm:

[JABracing#7]

Thanks honda rida

[JABracing#7]

bump

[JABracing#7]

bump

[JABracing#7]

bump

[JABracing#7]

bump

[JABracing#7]

bump

[quad2nv]

if you've still got the k&n and the handguards, please send pics to rthompson@gardenoflife.com
thanks

[dbsbl1]

Have you got the ignition switch with the keys?

[JABracing#7]

Yes I still have the ignition and keys... email sent quad2nv.

thanks

[JABracing#7]

bump

[JABracing#7]

bump

[dbsbl1]

Originally posted by JABracing#7
Yes I still have the ignition and keys... email sent quad2nv.

thanks

How much you want for it?

[dirtmomma]

Anyone know if the rear shock will fit a 300ex???? Is that a shipped price??

[blitzkrieg05]

I'm interested in the axle, blitzkrieg05@yahoo.com

[JABracing#7]

axle is gone, im not sure about the shock for the 300ex... and $50 shipped for the ignition and keys

[dirtmomma]

Sooooo is that $50 SHIPPED for the shock?????????? Do you take PayPal??? LMK thanks ;):) It's an inch longer than a 300 one :)

[stace609]

Originally posted by JABracing#7
$20 shipped its yours Can you send me a pic of the grab bar? thanks.

[JABracing#7]

grab bar is gone, $60 shipped for the shock and i would prefer check or money order, $50 shipped for the igntion


thanks

[Prazak250EX]

sent you a few pm's. Wanna know if you got the money order yet. Pm me or somethin

[JABracing#7]

I have not recieved the money order yet i will let you know when i ship your parts.

thanks jay

[JABracing#7]

bump

[stick400]

will the dg front bumper fit a 300ex? send pics to r1stick@aol.com

[JABracing#7]

front bumper is sold sorry. :(

[JABracing#7]

bump

[Prazak250EX]

Still didn't get the check yet?

[Joecool1264]

Did you get the money order I sent for the big gun pipe? I sent it last week . Let me know something, thanks Joe

[JABracing#7]

I shipped the pipe last week you should be recieving it very soon. thanks. And I just recieved the check for the bearings, axle, and hub and I just need to get a 19mm hex wrench so i can get the bearings out then i will ship it out asap priority mail. Thanks alot

[Joecool1264]

I just ordered the pipe. What bearings?

[JABracing#7]

the message about the bearings was seprate... it was to a different person... your pipe is on its way thanks

[Briandbaker]

Does anybody know if the wheel spacers will fit an '87 250X (as far as bolt pattern)? Are they 5" rear and 3" front?
If you think they will work on an 87 250X, please email pics to briandbaker@hotmail.com
thx

[Prazak250EX]

No problem man, nice doin business with ya! CAN'T WAIT TO RIDE AGAIN!

[SixDubR]

How about those handlebars...Are they good and straight...How is riding with them over stock bars?

[priebo15]

still got the handguards?

[priebo15]

how'd u like those wheel spacers? did it ride smooth? did u jump any with the front ones? im thinking about gettin some and was wondering, thanks

[JABracing#7]

35 shipped for the handguards,

30 shipped for the handlebars... and I did prefer them quit a bit more than the stock ones and yes they are straight and in good cond. also I will throw in a honda racing bar pad

wheel spacers... sold

thanks guys

[Prazak250EX]

Hey man, did you send my parts yet? I'm gettin antsy! PM me back

[Joecool1264]

I got the pipe wednesday, thanks Joe

[SixDubR]

Any pics of the handlebars or u know of any sites with pics of them on the quad?

[JABracing#7]

ill send you a pic of the handlebars thanks

[Joecool1264]

I didn't get the exhaust flange that connects the head pipe to the head. The stock one will not fit & Biggun doesn't sell just the flange. Let me know something. thanks Joe.

do u still have the prodesign kill switch.


it should work for a 300ex right??? let me know

[JABracing#7]

Joecool... Are you talking about the clamp that seals between the header and the muffler???

Yes I still have the killswitch and yes it will work for a 300ex.

[dodgem340]

Forgive me for my lack of knowledge...is this a 2-stroke or 4? I am looking for a carb for a 4-stroke. Thanks

[priebo15]

its ok, its a 4 stroke...u must be new to the sport??

how much ill give u $15.00....email adress exracer0@yahoomail.com

[dodgem340]

Looking for a carb and throttle cable...how much with shipping to WA. Thanks

[Joecool1264]

No the flat piece of metal that fits around the head pipe & has two holes that the studs in the head go though to hold the head pipe to the head. I uesd the stock clamp, it fit fine.

[Prazak250EX]

Just wanted to know if my parts ever got shipped or not. Also wonderin if I might have them before Christmas.....

[JABracing#7]

20 shipped for the killswitch

50 shipped for the carb and throttle cable

thanks

[Bigg Pimpin]

Still got the axle? Is it bent at all? Splines in good shape? What about where the bearings ride is it worn? Pics? bigg_pimpin22@hotmail.com

[Prazak250EX]

Bigg Pimpin

I already bought the axle and bearings offa him.

[250exen]

JABracing#7 empty your pm box...
still got the shifter?
im interested in it.. stripped mine out i think im gonna take a look when it thaws out a bit... you dont by chance still have the motor? i may need the shifter pin thinggy... the thing the shifter attaches to.... i think thats a big project to get at tho...
thanks
tj

[chunk690]

I was just wondering if you still had the front hood and the plastic piece around the gas tank? Thanks!n Any pics of the whole front plastic?

[250exen]

bump

[brian-250]

still got the handguards? lets ee some pics.

[JABracing#7]

shifters gone

plastics are racing cut and are in good condition and yes i have the piece that goes around the tank.

the handguards are red sorry i dont have a pic right now but i will try to send you one asap

thanks

[RideYELLOW06]

Hello forgot my password to ridered and cant get the password back...makes me angry

N e way... My start solenoid just went out on me need to know if you still have yours..?? get back as soon as you can....

Thanks a lot,

Jake

[JABracing#7]

i dont know what a solenoid is

[NikNacs67]

pretty sure thats what its called but it is the black round thing that sits in a rubber mount for it located under the seat. its farthest to the rear i beleive... has a negative and postive terminal on it.... let me know if that helps you out... i need to do one more test b 4 i am sure that it is the solenoid.....

thanks

[RideYELLOW06]

sorry that was the wrong name it was me tho...:)

[NikNacs67]

It kinda looks like this.

http://www.cyclewareables.com/pages/street_motorcycle_starter_solenoids/universal_solenoid.gif

[JABracing#7]

alright im pretty sure i have that... ill check it out tommorow... wanna make an offer???

[JABracing#7]

bump

[priebo15]

how much would u want for the front spacers?

[JABracing#7]

spacers are gone

thanks

[JABracing#7]

bump :o

[JABracing#7]

bump

[droptop]

still got he rear wheels and tires?? send me pics to
94-droptop@comcast.net thanks.Dave

[JABracing#7]

bump

[Lordlindsey]

Still got the black plastic that goes around the ignition switch, choke and lights?
I'll give you $5 for it.

[Nacsracer250r32]

do u still have the axle and kill swith

pm me if u have them thanks

[brokeitin3]

DO YOU STILL HAVE THE REAR HUBS, FRONT HUBS, CALIPERS, AND SPINDLES?

[Honda5]

do you still have any of the motor left? I am in need of the springs and weights on the auto clutch and I need it asap.

[gumby2461]

u still have ur bearing for the rear?

[BR16250]

still have the 250ex rear shock? post pics if so