Removing my 300ex swingarm bolt

[mc1984]

I am getting ready to remove and grease my 300ex swingarm bolt. It is an older machine and to the best of my knowlage has never been removed or greased. I am guessing that it is stuck so I am planning for the worse. I have heard of some people cutting the bolt, but on a 300ex the tube where it goes through the swingarm is solid, so it couldnt be cut. I was just wondering if anybody had any tips or advice. Thanks in advance!!!

[sprtrx300ex]

when your trying to remove it and it seems stuck, try turning it with the wrench as you pull it out. If it doesn come out, spary some wd-40, and get another bolt or something the same size and hit it out from the other side, be careful u dont mess up the bolt.

Also u might need to wiggle the wheels up/down, side/side as your doin it.