Checking intrest - 400ex stroker bottom end

[Craig02]

I have a complete 400ex bottom end with a stroker crank, hinson clutch basket, and heavy duty timing chain. I am thinking about selling. If anyone is interested I will listen to any serious offers.

[Chef]

How big is the stroker?

[Craig02]

It had a 416 size piston and the displacement was 440.

[mikeboone]

Does it have the stock connecting rod?

[44oEX]

well when you stroke you need a sorter connecting rod so the piston wont slam in the head. So probably not

[Aceman]

Not necessarily, you can install a piston with the piston pin location moved closer to top of the piston.

[mikeboone]

Originally posted by 44oEX
well when you stroke you need a sorter connecting rod so the piston wont slam in the head. So probably not

You can run stock length rod with stroker piston or shorter rod with standard piston. It is likely it has a Carrillo stand length installed. :chinese:

[44oEX]

sorry my bad

[tbargides12]

what are u looking to get out of it im very interested

[Craig02]

It is a 4.0mm stroke with a standard length rod and a custom piston. I tore the motor down to fix a head gasket leak and noticed that the piston has a crack in it, so I am considering selling the bottom end. I will only consider offers over $500.