PDA

View Full Version : 0 preload


panteramatt
10-20-2004, 08:31 AM
Can you have a 0 preload rear shock with standard aftermarket or stock fronts and it still work properly?
Silverfox@C&DRacing
10-20-2004, 02:32 PM
it will work but not to its full potential you will want to adjust the ride height up on the rear shock so the bike will sit level.
11-01-2004, 06:19 PM
If your bike sags too much in the rear with the ZPS shock you will have a hard time turning because it will want to push in the corners. Especially in the woods on a 400ex! You will need to get the sag within 1/2" lower in the rear if not level to get it to turn correctly.