Part out MX 426EX

[440ex kid]

Heres what I have:

Herrmann +3 long travel a-arms, +3 brake lines, tie rods w/ends
Gibson +1 stem with lonestar fatbar clamps
Renthal twinwall cr-hi bend bars
Axis triple rate, fully adjustable 19.5in front shocks
Gt thunder revalve rear shock with long travel linkage
Stock ’03 frame & subframe, fully gusseted, removable grab bar
Custom aluminum airbox with lovers punched in the left side, made with 1/8 in aluminum (comes with K&N and airboot)
Lonestar +4 axle, sprocket hub, antifade nut, rear hubs
Ac pro pegs, all mounting hardware included, brand new bolt on heel guards
Stock spindles, hubs, rotors, calipers, front brake lines, and lever/master cylinder
Stock swingarm, linkage, bearing carrier w/brake plate
Stock brake pedal, master cylinder, line, caliper, rotor
Have a set of stock wheels, backs are a little dented but hold air just fine, fronts are in good shape.
Complete wiring harness, battery and cdi, cr start button, pro design killswitch, coil, cannot run lights with this harness


Right now I dont know how much to ask for everything, so if you are interested PM me or post you offers here.

*edit* I also have stock oil tank, lines and cooler*edit*

[ZSK]

What is the rear shock setup for? Zero preload?

[ZSK]

Also what kind of condition is the stem in? What color etc?

[440ex kid]

The rear shock is setup for ZPS, and with the linkage it really lowers the rear end of the bike. It was one of the best parts I put on my bike, really helps alot on the mx track.

The stem is perfectly straight, never been bent or welded or anything. The clamps are in mint shape. It is black, but I can paint it red if you wish. The paint is aircraft paint and clearcoat (my dad is and aerospace engineer), it is HARD stuff. Let me know.

[f.s.o.s]

how much do you want for the whole front end. and do you have any pics

[gotahemi2004]

Ac pro pegs, all mounting hardware included, brand new bolt on heel guards

do youg ot pics transbam@tampabay.rr.com im interested

[steveatv3]

have any rear beadlocks and tires?

[JDiablo]

Hey you have the price and a picture of the airbox thanks?

[K_Fulk]

Did he custom make that linkage for you, or is it the xc version?

Also, did you race at sandusky any this year?

[quadkrazy400ex]

im interested in the AC propegs, all i need is a picture and a price

btw..what color nets?

[the Z Man]

How much for the carrier and antifade? Z # 5

[the Z Man]

Is the carrier stock, and what kind of locknut is it?

[CTmxyfz]

how much for the axle? pics?

[redrider311]

any plastic for sale?

[peewee]

Willing to buy subframe and frame for 375 shipped if frame and subframe are in good condition and not bent. please email me back at kmjmwc97@yahoo.com. soon as possibly thanks

[xX-400racer-Xx]

would you be willing to take the sprocket hub and the brake hub off the axle ??

[440ex kid]

I would like to get 1500 for the whole front end (thats a-arms,shocks, tie rods, and brake lines)

150 shipped for the ac pro pegs(black nets)

I am keeping my beadlocks

200 shipped for the airbox, boot and k&n

He custom made the linkage for me, and i raced at sandusky about 4 times.

200 for the antifade and carrier (stock carrier in good shape, LSr antifade)

250 shipped for the axle

Have a full set of maier black plastic for sale

I was hoping to get a little more for the frame

I will not take the sprocket hub off the axle, and the brake hub is part of the antifade nut, sorry


I will try to have pics tomorrow or wendsday

[K_Fulk]

How much are you wanting for the gt thunder linkage.

Or linkage and shock. And what is it valved for.

i think i talked to you for a second when i raced up there in july.

[440ex kid]

I would like to get 350 shipped for the shock and linkage. Its valved for 135 mx rider, but is a little on the stiff side. I might have talked to you, I was on the black and yellow 400ex.

[K_Fulk]

If i did talk to you i asked you what kind of frontend you had. just remember the dude told me it was a hermann front end.

Do you have any pics of the linkage installed, if you email them to me i could post it for you.

[redrider311]

how much do you want for the black plastic? what kind is it and do you have any pics?

[the Z Man]

How about 165 shipped for the carrier and ls fade nut, I will have to put new bearings and seals in the stock carrier,, Z,, ps. I can pay by paypal if you like...

[peewee]

hey man i really would like to buy the frame and subframe.since 350 was not enough would 450 shipped be good enough!Is the frame powder coated or just gusted. please reply soon as you can thanks!

[440ex kid]

I would like to get 200 for the plastics

how about 180 shipped for the antifade and carrier?

The frame is painted with aircraft paint. I will repaint it black, red or yellow if you want (my dad is an aerospace engineer, the paint is hard stuff) how about 525 shipped?

I rememeber talking to you, we were sitting in staging. I will try to get pics of everything so if you could help me post them that would be great.

[K_Fulk]

It was you then, send me them pictures and ill get them up for ya.

[440ex kid]

Ill try and get them tomorrow

[trx310]

500 shipped for frame and sub? Bent or cracked?

[trx310]

how much for airbox?

[440ex kid]

500 + shipping for the frame, not cracked or bent, has a small dent in the bottom, but nothing that will be a problem.


200 shipped for the airbox, boot and k&n

[Xowner]

clutch perch? what kinda if its aftermarket ez pull how much? and were are you in ohio ?

[440ex kid]

I have an msr perch, it has ball bearings in the lever where it pivots, well they broke on mine and fell out. It still pulls fine but ithas a bit of play in the lever. If you really want it though how about 15 bucks shipped? It was originally 60.

[Xowner]

thanks but no thanks

[440ex kid]

bump stuff still for sale

[quadkrazy400ex]

gonna get some pics up? i'd like to see a pic at least of the ac nerf bars

[440ex kid]

Anyone interested in a rolling chassis? everything I have for sale all in a package?

[QuAdEr 317]

how much for the roller complete?

[440ex kid]

3000 sound good?

[400exrider_ed]

How much for the front shocks?

[440ex kid]

1000 shipped for the shocks.

[440ex kid]

I took some pics tonight, will have them up by tomorrow evening, check back.

[QuAdEr 317]

how much for the gibson stem? what color is it?

[440ex kid]

200 shipped, its black.

ANY BEADLOCKS,TIRES?

[400rider01]

do you have any braided brake lines?

[440ex kid]

No I am keeping my beadlocks, and my brake lines will go with my a-arms.

[440ex kid]

bump

[K_Fulk]

his pictures

[K_Fulk]

2

[K_Fulk]

3

[Abrab916Ex]

im interested in the pro pegs..........send me a pic... rocaunit916@yahoo.com

[K_Fulk]

his pro pegs

[440ex kid]

Everything is still for sale, needs to go quick. Make offers please!!

[redoy]

Interested in axle and a-arms. PM me with a price for each. Thanks!!

[440ex kid]

alright im gunna give some prices I would like to get


Herrmann +3 long travel a-arms, +3 brake lines, tie rods w/ends...550 shipped
Gibson +1 stem with lonestar fatbar clamps...215 shipped
Renthal twinwall cr-hi bend bars...70 shipped
Axis triple rate, fully adjustable 19.5in front shocks...950 shipped
Gt thunder revalve rear shock with long travel linkage...350 shipped
Stock ’03 frame & subframe, fully gusseted, removable grab bar...550 shipped
Custom aluminum airbox with lovers punched in the left side, made with 1/8 in aluminum (comes with K&N and airboot)...175 shipped
Lonestar +4 axle, sprocket hub...225 shipped
Ac pro pegs, all mounting hardware included, brand new bolt on heel guards...150 shipped
Stock spindles, hubs, rotors, calipers, front brake lines, and lever/master cylinder...250 shipped
Stock swingarm, linkage, bearing carrier w/brake plate...200 shippped
Stock brake pedal, master cylinder, line, caliper, rotor...175 shipped
Complete wiring harness, battery and cdi, cr start button, pro design killswitch, coil, cannot run lights with this harness...100 shipped
stock oil tank, lines and cooler...125 shipped

*Prices are negotiable*

[440ex kid]

bump

[TampaBoy813]

Originally posted by 440ex kid
alright im gunna give some prices I would like to get

Gibson +1 stem with lonestar fatbar clamps...215 shipped


*Prices are negotiable*

$150.00 Shipped? ASAP I can send the Money VIA PayPal ASAP!

-Paul

[440ex kid]

Considering this is a 390 dollar setup I dont think I will go that low. If you want just the stem, with no clamps, then how about 175 shipped?

[TampaBoy813]

Originally posted by 440ex kid
Considering this is a 390 dollar setup I dont think I will go that low. If you want just the stem, with no clamps, then how about 175 shipped? 180.00 Shipped on the Stem and mount?

-Paul

[400rider01]

will you sell the brakelines separate from the aarms? if so how much? thanks nate

[QuAdEr 317]

curious if you could get the arms repowdercoated but if not im jus wondern

[440ex kid]

How about 200 + shipping on the stem and clamps. No I will not sell the brakelines seperate, and what color did you want the a-arms?

[LT250Racer609]

Lonestar +4 axle....how much are u asking???

[440ex kid]

215 shipped

[440ex kid]

alright i really need to get rid of these parts so any reasonable offer from here on out will be sold.

[TampaBoy813]

Originally posted by 440ex kid
alright i really need to get rid of these parts so any reasonable offer from here on out will be sold.
$180.00 for the stem and mount Shipped?

[440ex kid]

how about 200 shipped

[TampaBoy813]

Originally posted by 440ex kid
how about 200 shipped
$190.00 Shipped? and how about some pics of it?

[440ex kid]

200 shipped and whats your email?

[TampaBoy813]

Originally posted by 440ex kid
200 shipped and whats your email?
Pcorbin@tampabay.rr.com

$190.00 Shipped!!!:devil:

[APK400exRacer]

how much for HMF?

[440ex kid]

150 shipped sound good?

[440ex kid]

bump

[440ex kid]

*bump*

[440ex kid]

Heres what I have left


Herrmann +3 long travel a-arms, +3 brake lines, tie rods w/ends
Gibson +1 stem with lonestar fatbar clamps
Renthal twinwall cr-hi bend bars
Axis triple rate, fully adjustable 19.5in front shocks
Gt thunder revalve rear shock with long travel linkage
Stock ’03 frame fully gusseted
Ac pro pegs, all mounting hardware included, brand new bolt on heel guards
Complete wiring harness, battery and cdi, cr start button, pro design killswitch, coil, cannot run lights with this harness



**need to sell quick make offers**

[eagertorace]

[COLOR=red][COLOR=red][SIZE=1][SIZE=3]

I have +2 JD Performance a-arms and works triple rate w/rezz.
pro series, would you be interested in trading for your front end?

[buddah]

How heavy of a rider are the front shocks valved for? I have a new ATK 450 and I'm installing a long travel front end. I need 19'' shocks and your's are 19 1/2''. I will check and see if these will work.

Thanks :D

[440ex kid]

They are valved for 175 pound rider. Gt thunder can set them up for you nicely though.

[dukeboy]

you have a pm

[boostang02]

does the frame have any paperwork, if so i want it, let me know, 400 shipped if its in good condition, no bends cracks.

[440ex kid]

Herrmann +3 long travel a-arms, +3 brake lines, tie rods w/ends
Gibson +1 stem with lonestar fatbar clamps
Renthal twinwall cr-hi bend bars
Axis triple rate, fully adjustable 19.5in front shocks
Gt thunder revalve rear shock with long travel linkage
Stock ’03 frame fully gusseted(no subframe)
Ac pro pegs, all mounting hardware included, brand new bolt on heel guards
Complete wiring harness, battery and cdi, cr start button, pro design killswitch, coil, cannot run lights with this harness


Still have this stuff for sale, make an offer need to get rid of it all ASAP!!!

[the Z Man]

How much for the kill sw. Z.

[440ex kid]

I would rather sell it with the harness because it is wired into it.

[440ex kid]

Herrmann +3 long travel a-arms, +3 brake lines, tie rods w/ends.....300 shipped
Gibson +1 stem with lonestar fatbar clamps....165 shipped
Renthal twinwall cr-hi bend bars....45 shipped
Axis triple rate, fully adjustable 19.5in front shocks....pending sale
Gt thunder revalve rear shock with long travel linkage....pending sale
Stock ’03 frame fully gusseted(no subframe)....250 shipped
Ac pro pegs, all mounting hardware included, brand new bolt on heel guards...115 shipped
Complete wiring harness, battery and cdi, cr start button, pro design killswitch, coil, cannot run lights with this harness....75 shipped.

[dsheola]

Got a rear brake rotor?

send a pic and a price to wannagobigex@yahoo.com if you got one

[eagertorace]

Originally posted by 440ex kid
Herrmann +3 long travel a-arms, +3 brake lines, tie rods w/ends.....300 shipped
Gibson +1 stem with lonestar fatbar clamps....165 shipped
Renthal twinwall cr-hi bend bars....45 shipped
Axis triple rate, fully adjustable 19.5in front shocks....pending sale
Gt thunder revalve rear shock with long travel linkage....pending sale
Stock ’03 frame fully gusseted(no subframe)....250 shipped
Ac pro pegs, all mounting hardware included, brand new bolt on heel guards...115 shipped
Complete wiring harness, battery and cdi, cr start button, pro design killswitch, coil, cannot run lights with this harness....75 shipped.

Save the shock and linkage man, I'm gonna buy it.
thanks

[440ex kid]

No I dont have a rotor sorry.



And yea I am saving the shock and linkage.

[440ex kid]

Herrmann +3 long travel a-arms, +3 brake lines, tie rods w/ends
Gibson +1 stem with lonestar fatbar clamps
Renthal twinwall cr-hi bend bars
Axis triple rate, fully adjustable 19.5in front shocks
Ac pro pegs, all mounting hardware included, brand new bolt on heel guards
Complete wiring harness, battery and cdi, cr start button, pro design killswitch, coil, cannot run lights with this harness


Have this stuff left make offers

[tbrink]

check ur pms

[sprtrx300ex]

The shocks are sold......

check your PMs

[dredogg2132]

yo0u still got the oversize clamp

[ryanstravis]

how much for the long travel front a arms
and can you email pics and a phone # so we can get this stuff bought faster?
Ryanstravis@hotmail.com

[440ex kid]

Yes I still have it. Make a reasonable offer and its yours.

[quadcustoms]

i didnt want to read through the book so ill just ask,you still have the front shocks?if so how much?

[440ex kid]

No sorry they are sold

[poll77]

will you sell the stem without the clamp and what is your lowest price on the gibson stem shipped to 62275

thanks

[440ex kid]

155 shipped without the clamps

[ryanstravis]

how much for the a arms and shocks and brake lines
also how much for the anti nut what weight are the shocks?
your pics dont show the a arms got any more pics?

[LuckyCharms]

send pics of a arms to raarmour@hotmail.com

[Tyler25]

sent you a pm

[rntdfrd]

I am interested in the a-arms and stem w/clamp. Please e-mail pic to rntdfrd@yahoo.com

I will pM you my cell # if you want to talk business and get this stuff sold. I live in Alaska which is 4 hrs earlier thatn the east coast.

[ryanstravis]

how much for the lt shocks and brake lines and what weight are they set up for?

[HB300ex]

have any wheels?

[440ex kid]

how much for the lt shocks and brake lines


They are sold.


have any wheels?

Stock front wheels with holeshot mxs on them.

[fyffe23]

you still got the frame or the shock/shock linkage or a swingarm? im in the middle of building two fourwheelers and one needs a frame and the other needs a swingarm. let me know.

[440ex kid]

Herrmann +3 long travel a-arms, +3 brake lines, tie rods w/ends
Gibson +1 stem with lonestar fatbar clamps
Renthal twinwall cr-hi bend bars
Ac pro pegs, all mounting hardware included, brand new bolt on heel guards
Complete wiring harness, battery and cdi, cr start button, pro design killswitch, coil, cannot run lights with this harness



This is all I have left. Please make offers.

[littlebadger]

will you take $30 shipped for the bars..are they for 7/8 inch clamps? email me at pinkfloyd54@hotmail.com I need new bars

[E-ATV-Racing]

Price on the brake lines? Also what color are they and are they dual lines from the master cylinder down?

Thanks

how much for the rear shock??? i say 300!:D :D

[hondaluke00]

do you still have the subframe and how much do you want for it?

[440ex kid]

The only thing I have left is the stem, clamp and the bars. The bars are twinwalls so they are 1 1/8in. And for 30 bucks, I will keep them before they go for that price.

what about the stem? is it stock size??

[littlebadger]

what is your price for the clamps and bars shipped..what kind of bend are they

[440ex kid]

The stem is +1. And it is going with the clamps. I have decided to keep the bars. The stem and clamp will be 175+ shipping

[Dave300ex]

still have stock front tires? have pics? send pics to d69man2000@yahoo.com

[440ex kid]

still have stock front tires?




The only thing I have left is the stem, clamp and the bars.

[APK400exRacer]

where did you buy the heelguards? how much were they?

[440ex kid]

They came with my nerfs