PDA

View Full Version : what do you think it'll cost?



51
09-01-2001, 08:28 PM
:confused:
i am getting ready to sent out my motor and am kinda curious on how much it is going to cost

i need a new rod/installed
new piston,ring kit prolly je or wiseco/for a 416 kit
and a good valve job ( already have springs and good stuff just not a 3 or 5 angle valve job) and they need lapped too
i already have a w/b track cam.
and a stock bore sleeve and it installed too ?

can anybody give me an idea
oh yea i'd like to have my flywheel shaved too

and does anybody know where i can get a stock bore sleeve?

thanks toby:devil

Dave400ex
09-01-2001, 08:47 PM
Who are you sending it to?

51
09-01-2001, 08:57 PM
i am takind it to lost creek cycles so it'll prolly go to tc

i am figurin 6-750 ish???

never had a compete engine done before kinda exciting wish i could ride while i am waiting though

edit: ohh yea thanks for all your replies in advance:(

Dave400ex
09-01-2001, 08:59 PM
TC is what I first thought. Shouldn`t be over a thousand.

51
09-02-2001, 07:14 PM
anybody else?

wyndzer
09-03-2001, 01:52 PM
I would buy a stock cylinder from Service Honda, if I remember I paid just over $200.00 for mine.

51
09-03-2001, 05:53 PM
thanks for the replys keep em comin

51
09-06-2001, 06:46 PM
well my motor went to the shop tonite..decided to go 416..i'll keep you guys updated one whats goin on..lata

oynot400
09-07-2001, 08:23 AM
When I had my 440 kit installed I think the total bill was around $800. That included the 440 kit, WB track cam, springs, port and polish, and changing the sleeve and honing the cylinder to mate the piston.
I did all the tear down and put back together, so all I took him was the jug and head.
Hope this helps....;)

51
09-09-2001, 06:37 PM
thanks oynot...anybody else