Rear hubs

[SixthFloorFreak]

I don't know what the hell is up with my rear hubs on my 250r.

When i first bought the bike a few weeks ago, they were loose, an issue i found when i got home. No big deal...pulled em off, anti-seized the splines, put em back on nice and tight, and replaced the pins in the axle nuts. i just noticed the other day that they're loose again.

Do hubs wear out? I would assume they do, and that the anti-seize i put on the splines made them feel tighter than they actually were.

Anyone have some insight into this? Also, who makes the best set of rear hubs?

[Silverfox@C&DRacing]

the splines in the hubs do wear out.. I would take the nut off and see how much play you have if any. if their is play then I would replace the hubs, durablue makes an aluminum hub with steel splines

[SixthFloorFreak]

Originally posted by Silverfox@C&DRacing
the splines in the hubs do wear out.. I would take the nut off and see how much play you have if any. if their is play then I would replace the hubs, durablue makes an aluminum hub with steel splines

can you pm me some prices on all the hubs you carry that will fit my bike

thanks

:)