wet sand plastic??

[sparks400]

i was woundering if the light scrachs will come put if i wet sand my plastics? this was just a thought

[kicken250x]

they will but you have to buff them back out. wet sanding will dull the shine really bad. id go with 400, 800, 1500 then a low pile buff

[stupid driver]

after you do this, you might think about torching your plastics. Do a search about this, there is some good information. It brings a lot of the shine back to the plastic

[1BAD4HUNDI]

Here are some pics of mine after wet sanding and after I sprayed on Terry cable plastic renew,works pretty good . You'll need at least two cans at $25 a pop or I usually use PC Racing plastic renew $18 a bottle and I've done my quad like 6 different times and still have about 1/4 of a bottle left!!http://img.photobucket.com/albums/v490/1BAD4HUNDI/DSC00880.jpg http://img.photobucket.com/albums/v490/1BAD4HUNDI/DSC00885.jpg :D

[Rootar]

i just ordered some pcracing plastic renew this may sound dumb but whats wet sanding and those rears look very purdy:eek2:

[stupid driver]

wet sanding is the process of spraying whatever you are sanding with water while you sand.

[JDiablo]

did those rears stay that color?or was that just because you just applied the stuff so that was why it was so shiney?

[1BAD4HUNDI]

Nothing is indestructable, the plastic stayed shiny for quite a while but after riding through the wood for a while they get scratched up. I prefer the PC racing plastic renew, it holds pretty good and at $18 a bottle... like I said I've done my quad at least six times and still have about 1/4 bottle left!! Don't get me wrong it's a lot of work to get it to look good, BUT when compared with buying new plastic all the time I'll do some work any day!:D

[Rootar]

i got my stuff saturday and i startedon it lsat night it looks just like those on the back and im doin the frotn sanding today then ill apply the stuff to all of it how should i put the stuff on it didnt really say in the instructions? do i jsut put some on the towel and rub it on in circles evenly over the whole fender then let it dry and do another 2 coats? or what