Another Kill Switch Q

[Moto92]

I know this subject has been beat to death...so heres another swing. You guys have said its much easier to connect the Pro Design kill switch to the wires on the handlebars rather than the coil. There are seven wires in the bundle that lead to the starter button. I have tried to figure out which one to wire the switch to but Im not having any luck. Does anyone know which wire/color is the one I need to splice into.

[rob-u/21]

check this link out it gives you full details on how to instal your kill switch.

www.off-road.com/ATV/reviews/products/ProDesign (http://www.off-road.com/ATV/reviews/products/ProDesign/)

[Moto92]

theres nothing at that link

[Moto92]

I did a search on the site and found it, even happens to be on their project 400EX
Very good article for anyone else needing help with this.

[Atomic83]

I found it easier to run both wires down to the coil. Splice the long wire to the black wire with the yellow stripe thats runs from the cloil, and ground the other one somewhere. I just attached it to one of the bolts that holds the coil on.

Originally posted by Atomic83
sPlice the long wire to the black wire with the yellow stripe thats runs from the cloil, and ground the other one somewhere.

exactly what I did...:D

[DESDAK4]

Same here, took like 10 min to do and works great.