250r pro series performance radiator, YZ426 LSR frame, oversized oil tank, much more.

[pnut420]

Im parting out my quad so this stuff needs to go. Im looking to get $1100 for it with a balwin motorsports sterring stem clamp. I has all the motor mounts for the yz motor, as well as pivot bolt, etc.. Also what will go with it is the rear master cylinder and a yz426 brake lever. I can prob also throw in the part that goes under the gas tank. It comes with standard ac nerf bars also.

I also have a tc racing exhaust that fits this frame , as well as pro series performnace radiator, and scoops and a grill that are just fit in this frame, it worked out good

[pnut420]

Here is a list of parts and prices.

$1100- LSR frame, stem clamp, rear master cylinder and AC nerf bars
$350 pro series perfomance radiator
$50 scoops
$35 grill for radiator
$100 oversized oil tank. I replaced the bottom bolt with a better thread and it seems better than new.
$50 stock 250r radiator
$1800 2001 yz 426 motor with TC racing race port, etc... motor is very fast and doen by one of the best, TC racing.
$250 TC racing exhaust for YZ426 in LSR frame might work for Arens
$300 LSR swingarm +1 1/4

[pnut420]

http://www.imagestation.com/picture/sraid118/pe47e67cd8ecdbb46f0e4cb695c681877/f8912162.jpg
http://www.imagestation.com/picture/sraid118/p2efc968ef16406dad7ba6ace8fdf6b2f/f8911db9.jpg
http://www.imagestation.com/picture/sraid118/p162f3e0a762915437cabcfc02ab09e5a/f8911d34.jpg
http://www.imagestation.com/picture/sraid121/p0631c83387343b6e190240a9a7b15201/f851e61b.jpg
http://www.imagestation.com/picture/sraid121/p5058750a09fd76754b4659fab624cdf3/f851e5b9.jpg
http://www.imagestation.com/picture/sraid121/pca545dea1ce82271f7d710d0400337e0/f851e551.jpg
http://www.imagestation.com/picture/sraid121/pbe5af57e16a65f10c990d4246ecd8df7/f851e4e8.jpg
http://www.imagestation.com/picture/sraid121/p451fb5b880753442c4b92c23daf09e53/f851e3b1.jpg

[Chef]

Where is the radiator?

[pnut420]

Originally posted by Chef
Where is the radiator?

the pro seires is in the frame, but I didnt get pics after I swapped the stock one with the pro series. I can get pics if yah need.

[DEAL]

Would the oil tank fit a 400ex?

[YZFman]

Will the exhaust work in a 400ex frame conversion?

[pnut420]

The oil tank will fit a 400ex and the exhaust should fit the conversion or be real close, most people modify them a bit.

[tdd6405]

the pipe will work in a conversion. i had one in my old conversion. i had to bend the headpipe just a little bit but i did it myself and it was real easy.

[pnut420]

Originally posted by tdd6405
the pipe will work in a conversion. i had one in my old conversion. i had to bend the headpipe just a little bit but i did it myself and it was real easy.

yeah it is slightly bent where the frame is but it does clear, but most likely pipe is sold...

[pnut420]

radiator
http://www.imagestation.com/picture/sraid141/p962536d0b1bf070f8553bf03619a7dcd/f6d6d655.jpg
http://www.imagestation.com/picture/sraid141/p7d5f3ff9aae6f0baeb36d5d94dd3ccc6/f6d6d6c1.jpg
http://www.imagestation.com/picture/sraid141/p4017f920e3e7e284c3ab610527ad38e9/f6d6d761.jpg

I have other threads with more pics and other parts as well just keep looking through the frist few pages :blah:

[CrashBailey]

still got the oil tank? if so could i get a pic of it?

[pnut420]

Originally posted by CrashBailey
still got the oil tank? if so could i get a pic of it?

I still have it, give me a little bit to get the pic.

[dart450r]

do you still have the radiator and what is the best price on it?

[rdgarry]

Will the radiator bolt up to a stock 250r frame?

[pnut420]

Originally posted by dart450r
do you still have the radiator and what is the best price on it?

$350 shipped for radiator, $400 with scoops and grill.

gdgarry yes it will bolt up to a 250r frame, Exoduscycles sells these for around $560 without shrouds its the best radiator out there and no doubt will keep any built 250R and crf/yz cooled down, plus it looks sweet :blah:

[CrashBailey]

ok ill keep my eyes open for a pic thanks James

[pnut420]

Oil tank (Still in frame sorry)
http://www.imagestation.com/picture/sraid141/p4017f920e3e7e284c3ab610527ad38e9/f6d6d761.jpg

http://www.imagestation.com/picture/sraid141/p962536d0b1bf070f8553bf03619a7dcd/f6d6d655.jpg

It is basically a pingry look alike. the bottom bolt has been tapped with bigger threads and seems tuffer than before.

[harescrambles]

hey, ill take the oil tank if no one els wants it. looks just like the pingry:D . thanks

[gratzracing24]

how much for the rear master cylinder?

[fast440]

Sent you a PM PNUT Please let me know Something Thanks:)

[pnut420]

Originally posted by gratzracing24
how much for the rear master cylinder?

Sorry Im selling that with the frame

[pnut420]

Originally posted by harescrambles
hey, ill take the oil tank if no one els wants it. looks just like the pingry:D . thanks

ok cool, just pm me and Ill work up a shipped price and if you need to I can give you my shipping info, send yours again and I will send this tank you way.

[pnut420]

Received money for the Exhaust, oil tank is sold and working on a deal with the frame. Also putting stuff on ebay hopefully this weekend. I will do $375 shipped on the radiator with shrouds and grill.

I have many other parts for sale also, just ask and I might have it.

[robyone]

hey pnut ! if you still have the radiaior on wed. I'll probably take it

[pnut420]

Originally posted by robyone
hey pnut ! if you still have the radiaior on wed. I'll probably take it

Ok cool. Maybe by then Ill go down on my price, got a YFZ and need to do stuff to it.

[pnut420]

Frame and oil tank are sold as well as Exhaust.

Radiator is going on ebay soon.