parting out yz426/400ex, all aftermarket

[pnut420]

Ive been working on this quad for a long time now and just got feed up with it. I dont have the time to finish it up and I didnt realize how bad I need a titled quad, etc...

It has a LSR frame for the yz motor. I have ROLL long travel a-arms with trick Walsh tie rod ends ($200 new). For the front shocks I have Elka 19 inch shocks that look new but the screw came loose for the oil ine so they need reserviced which isnt a big deal if you plan on rebuilding them. The rear shock is a PEP non ZPS. It has a LSR swingarm that is 1 /4 over stock. I also just got a oversized radiator for ir and air scops and a radiator grill. Ill try to list more toomarrow but for now Im just kinda seeing the interest people mght have in this. I will get more pics and info tomarrow. It also has a 2001 motor that was redone by TC racing and got a full race port and other goodies. I ahve a tc racing exhaust for it and a bunch of other stuff I will list tomarrow.



http://www.imagestation.com/picture/sraid121/p451fb5b880753442c4b92c23daf09e53/f851e3b1.jpg

http://www.imagestation.com/picture/sraid121/p80759458285cf8056fbbb6b34664b7aa/f851e40f.jpg

with stock radiator
http://www.imagestation.com/picture/sraid121/pd6e983603b5e77be44f0b165524087d4/f851e479.jpg

http://www.imagestation.com/picture/sraid121/pbe5af57e16a65f10c990d4246ecd8df7/f851e4e8.jpg

http://www.imagestation.com/picture/sraid121/pca545dea1ce82271f7d710d0400337e0/f851e551.jpg

http://www.imagestation.com/picture/sraid121/p5058750a09fd76754b4659fab624cdf3/f851e5b9.jpg

[CrashBailey]

how much for the roll front end? got any pics??

[mxquadracer]

what state are you in man? have a rough estimate for how much you're selling it for?

[Atreyu]

How much for frame motor combo? Thanks.

[pnut420]

For the frame and motor Im looking to get around $2800. The frame would come with the Baldwin motorsports stem clamp and the motor would include a dr.d hotstart and a decompression lever. I also have a yz450 exhaust cam I could probably through in if you wanted to make it an auto decomp motor.

For the ROLL a-arms I will get pics. They were used for desert racing before I got them and were a little bashed up on the lower a-arm(like the built in skid part). I have 2 new bushings for them and just bought 2 new sleeves and a full set of washers. Im wanting to get $550 out of them with regular +3 tie rods and $700 with the Walsh tie rods(have 0 rides on them).

As for a price on the whole thing really I wont get what a have into in that way. I sold the plastics to my brtoher already and may have the motor sold, I was gong to sell it then backed out, but now I decided to sell it and try a 450r or maybe yfz.

If I get a 450r I will have a brand new RPM axle for sale and 250r carrier, calipers and a bunch of other sruff, but if I go YFZ Ill need the axle , carrier, and my rear end stuff.

As for some quick proces, I need to get $300 for the swingarm, $550 for LT elkas with comp only, ssd. They need revalved since they leaked out the hose when they were shipped, but toher than that they look like new.

Ill get pics and stuff tomarrow, this was kinda a late night post. :blah:

Oh yeah Im in California also and prices do not include shipping.

[pnut420]

http://exoduscycles.com/products/otherproducts/proseriesper4manceradiator.jpg

I also have a pro series performance radiator that is in great shape. Im looking for $350 for it and will get pics. I also have scoops that work good withe radiator and a grill as well. Id like to get $80 for the grill and scoops.

[20400ex01]

how much do you want for the motor and harness?

[steveatv3]

I am interested in the Roll/Elka front end

i can offer you 1,000shipped and can i get pics to steveatv3@netzero.net I am kind of looking ahead of time because i will be buying a LT front end in about 2 weeks or so, i dont know if your willing to hold them that long. if not then i dont want to waste your time i know you have alot to sell

[pnut420]

Originally posted by steveatv3
I am interested in the Roll/Elka front end

i can offer you 1,000shipped and can i get pics to steveatv3@netzero.net I am kind of looking ahead of time because i will be buying a LT front end in about 2 weeks or so, i dont know if your willing to hold them that long. if not then i dont want to waste your time i know you have alot to sell

Im not in to much of a hurry but Im going to try and sell them for a little more than that, but if I get desperate I might take that offer. I have $200 just into the Walsh tie rods and $50 worth of new parts for the a-arms and other than needing revalved the shocks are like new, just leaked fluid when they were shipped.

[pnut420]

Originally posted by 20400ex01
how much do you want for the motor and harness?

Im looking to get $1875 shipped for it, I had it sold for this price then backed out on the buyer, so that is my base price. That would be for the motor, carb, electronics.

I also have a TC racing exhaust for it and some other stuff Im forgetting

[Hondadudeehhhh]

pm me for nerf price. and left front brake caliper if available. thanks

[pnut420]

Originally posted by Hondadudeehhhh
pm me for nerf price. and left front brake caliper if available. thanks

Now that I think of it, the nerfs might have to go with the frame or if you have an aftermarket frame you could use them, but my frame has built in mounts for them so the middle section in the front I dont have. If I do sell them seperate Im looking to get $60 for them otherwise they will go with the frame.

[Hondadudeehhhh]

thats cool, i already have nerfs but they are bent. Ill just try and streighten them out. thanks pm sent about the brakes

[steveatv3]

i could offer you 1200 for the front then, can i get pics to steveatv3@netzero.net

[pnut420]

Originally posted by steveatv3
i could offer you 1200 for the front then, can i get pics to steveatv3@netzero.net

I will get pics tomarow I went riding and didnt have time yet, but that seems about right Ill think about it tonight and let you know for sure tomarrow

[tdd6405]

good deals. these parts are all in great shape. the shocks look almost new besides the leak in the one.

Kevin- ill talk to my friend about that frame and i'll let u know tonight.

[pnut420]

bump, front end is sold, shock, a-arms and tie rods and ends.

[fast440]

I have emailed you through this board and Thumpertalk , No response. Do you still have the motor???? Email me at fasttonyp@aol.com Thanks :)

[pnut420]

Originally posted by fast440
I have emailed you through this board and Thumpertalk , No response. Do you still have the motor???? Email me at fasttonyp@aol.com Thanks :)

I still have the motor, but I dont think it was me you emailed, Ill check though, I get on thumpertalk but dont remember listing it there and never got a PM on here.

[pnut420]

bump. pics of most the parts I have, if you need pics just ask I got the camera going again

here is the other thread http://www.exriders.com/vbb/showthread.php?s=&threadid=124828&perpage=15&pagenumber=1

[pnut420]

bump

[pnut420]

bump. Make some offers on these parts, I have a YFZ now and need aftermarket parts.

[pnut420]

Exhaust is sold, front end is sold, and the frame is probably sold, but wanting to get $1175 shipped for it with LSR subframe, 400ex rear master cylinder and yz426 brake lever setup, oil lines, water lines, stock 250r radiator, open air filter setup, BMS stem clamp. Motor is still for sale and will be going on ebay.

[TampaBoy813]

Originally posted by pnut420
$1175 shipped for LSR subframe WOW is it made of gold?

[pnut420]

Originally posted by TampaBoy813
WOW is it made of gold?

no please read better.

and the frame is probably sold, but wanting to get $1175 shipped for it with LSR subframe, 400ex rear master cylinder and yz426 brake lever setup, oil lines, water lines, stock 250r radiator, open air filter setup, BMS stem clamp.

that is frame and all buddy, its $2500 for the frame alone from lonestar so yes its somewhat gold. Anyways its sold as well as exhaust and oil tank.

[vtweeked]

was woudering what motor is the tc motor is it a 400 ex motor let me know im interested give call @ 845-222-8547

[vtweeked]

what is the info on the tc mtr is it a 400 ex mtr give me a call @ 845-222-8547

[pnut420]

Originally posted by vtweeked
what is the info on the tc mtr is it a 400 ex mtr give me a call @ 845-222-8547

Motor is sold, it was a yz426 dirtbike engine