Legal Question (POPO?)

[TM426]

Would it be legal to make a weld-up a platform that is basicly a huge reciever with brake lights and possibly turn signals to carry a quad on. This would go behind like a full size blazer.

[250EXking]

probably going to need a license plate too.

all you need is brake lights turn signals and a lisences plate

[cdalejef]

There is already a company that makes them.

[TM426]

Cool thanks I have never seen one before:D I'll have to make one:macho

[remlapr]

The one I've seen doesn't have lights or anything....

[redrunner]

Here you go, one style anyway.

http://www.atvramps.com/atv_carriers.htm

[popo]

I think they gave you your answer

[TM426]

Thanks again I never heard of them before. I thought I could be rich:D I thought I heard that nothing could stick over 2' past the bumper. I was wrong

[Bad Ass TA WS6]

Originally posted by TM426
Thanks again I never heard of them before. I thought I could be rich:D I thought I heard that nothing could stick over 2' past the bumper. I was wrong

It would all depend on your states laws. You should be ok though.

[stace609]

we had one of those things for our dirtbike before and it sucked. the weight makes it hang down. i have a lifted tacoma and it would drag on speedbumps and crap. if you can, get a small trailer. they makes kits for a couple hundred bucks that you just put together and get a 4 x 8 for the bed.

[TheX1992]

Originally posted by stace609
we had one of those things for our dirtbike before and it sucked. the weight makes it hang down. i have a lifted tacoma and it would drag on speedbumps and crap. if you can, get a small trailer. they makes kits for a couple hundred bucks that you just put together and get a 4 x 8 for the bed.



Definately NOT the best route if you have any extension on your a-arms or axle. My stock width 250x BARELY squeezes in there. Mine was a Menards special that we built. Plenty of length, but no room for error on either side. Best bet for those is not to run any sides, just the platform.