getting quad tomorrow need some info

[JDiablo]

ok guys im getting my quad tomorrow and want to know what to lookout for,frame,cracks,straight,motor runs good,etc,etc...should be a narly purchase with steveatv3:devil: just anything else i should look for?

[ShiftFMX]

check out the oil :p

[JDiablo]

yea,that pivot bolt,and unnarly things about the engine,etc,etc

nice quad i can't wait to see what it looks like..also...You should really get that vein red frame!

[acold7dusta]

i like the green shox...check air filter thats a good key of maintenance

[310Rduner]

Lift the front end and spin to the tires, listen for any noises from the bearings. Just check for general tightness everywhere, feel for anything loose. Flip it on its side and take a look at the bottom of the frame for any rusting. Just look for every single thing on the bike that you want to know about before buying it. Discovering rust in certain places will feel a ton better than finding all that kind of stuff AFTER you buy it. I just like to know exactly what is up with everything on it so I don't dissapoint myself by finding it later. Look at the electrical connections for rust, or anything else.

[Cody_300ex]

Originally posted by kfx_roostin_you
You should really get that vein red frame!

His mommy wont let him. :o

[JDiablo]

Originally posted by Lil_300Ex_Kid
His mommy wont let him. :o

ahhh your gay i found a way to get me 700 dollars worth of powdercoating:o and im replacing the stock hubs first thing when i get home with a nice pair of hardkor hubs:devil:

[Toadz400]

How can you afford that quad and all the parts you are ordering for it when you are only 15?

Like the others said...just check for anything loose or rusty looking. Make sure the bearing are good all around and ask him to start it for you and let you ride it around...that should be the final test.

[roostin_dale]

Originally posted by Toadz400
How can you afford that quad and all the parts you are ordering for it when you are only 15?


your 16, and you have 2 modded quads

[310Rduner]

Also.. make sure he doesn'n warm it up before you get there. You want to see how it starts from dead cold. If he warmed it up, he could be trying to hide a starting issue. Wait for it to cool if you have to.

[JDiablo]

Originally posted by 310Rduner
Also.. make sure he doesn'n warm it up before you get there. You want to see how it starts from dead cold. If he warmed it up, he could be trying to hide a starting issue. Wait for it to cool if you have to.


ahh thats a good one,ill have to make sure....and to answer toadz,most of it is from working and parting out my quad:o

[ohski]

Originally posted by 300exrida
ahhh your gay i found a way to get me 700 dollars worth of powdercoating:o and im replacing the stock hubs first thing when i get home with a nice pair of hardkor hubs:devil:

I have a set of those at the house waiting to go on mine... I got them from Jeff @ the Quad Shop.

steveatv3 is a good guy..i have bought & sold a few parts from him...very honest guy

[JDiablo]

word,ill be getting my new quad at 7 today,can't wait to meet him as well...

[JDiablo]

ahh i can't wait getting the quad in about a hr!!!!!!:macho

[LTZ400rider]

looks like thats a clean motor:eek: anyway how much r u payin if u dont mind me askin. and what mods it have

[Toadz400]

Originally posted by roostin_dale
your 16, and you have 2 modded quads

Yea, I've been working for quite sometime and so have you, I was just wondering if he pays for his stuff or his parents spoil him to death.

[roostin_dale]

Originally posted by Toadz400
Yea, I've been working for quite sometime and so have you, I was just wondering if he pays for his stuff or his parents spoil him to death.

lol, i understand

[JDiablo]

no my parents don't spoil me to death....GRRR i work hard for my chit:grr: