killswitch

[tants]

i had my killswitch hooked up to the white wire and the other grounded to the frame. it worked for awhile but doesnt anymore. i checked the connection and the ground, and it still doenst work. ive herd of a kit they sell, but where else could i connect the killswitch to make it work?
:confused:

[dhines]

What kind is it? If it is a Pro Design. there is a tiny allen head screw that you can take out to disassemble the plunger portion of the switch. When you pull it apart, the contacts will likely be corroded, dirty, etc. Clean it with steel wool, sand paper or what ever, reassemble, and you should be ready to go.

[Pappy]

baldwin motorsports sells a small harness that makes hook up a snap.