Torq value

[SnowFlake]

well i was putting in my clutch and i cant find out what the torq value for the clutch srping bolts. so could anybody tell me what it is.

[SnowFlake]

someone has to know!!!!!!!!

[SnowFlake]

ttt

[cals400ex]

there isn't a torque value in the manual. i would just snug them down but not too much. i was thinking some people were putting them at 7 ft/lbs. so anyways, it isn't that much.

[SnowFlake]

ok ill try it see what happends. Any other suggstions?

[ewalker302]

My Clymers manual lists torque specs for the other clutch components, but not the spring bolts.

What it does say is:

a. Install the clutch springs on the hub bosses.

b. Finger-tighten the bolts.

c. Tighten the bolts, working in a crisscross pattern.

Make several passes so all bolts are tightened in equal steps.

:bandit:

[SnowFlake]

I looked through my manual and it said the same. Some one told me to look towards the front of the maunal look for the torque specs on that size bolt, i dont know if i should do that. I know this is anoying but i dont want those bolts coming loose when im riding.

[K_Fulk]

The spring tension will keep them from coming loose. Just snug them down. Don't put to much on them or youll break the part out of the inner hub.