Cleaning out my shop

[E-Racing]

It’s getting to be the end of the race season and I’m cleaning out my shop. Here’s what I have for sale:


Z400
2 – BRAND NEW One Industries Graphics white/red (no seat cover) - $25 each
BRAND NEW One Industries Graphics yellow/red (w/ seat cover) - $50
Complete radiator w/ fan and hoses - $150
BRAND NEW Stock front hubs - $75 set
2 – Stock left spindle - $50 each
2 – Stock right spindle - $50 each
Stock gas tank - $75
Braking rear brake rotor - $75
Stock rear brake rotor - $50
Stock rear brake rotor w/ RPM antifade - $150
Stock CDI - $25
Stock Swing arm bolt/nut - $20
Stock Oil tank w/ hoses - $50
Stock Crank case breather - $20
Complete electrical harness (key switch, CDI box, starter relay, battery cables) - $80
Stock coil - $10
Front brake calipers (powdercoated red) - $150
Rear brake caliper (powdercoated red) - $75
Stock head stay - $10
Stock brake pedal - $10
Rear master cylinder w/ reservoir and hose - $50
Z400 service manual - $10
Reverse cable and switch - $25
Ease Coast case saver - $5
RPM steering block (for RPM stem) - $20
Air box lid - $10
RPM +1 swingarm w/ bearing carrier - $600
Ars-FX long travel a-arms (black) - $750
BRAND NEW K&N filter - $20
Stock right side motor sidecase and water pump - $100
Stock starter assembly - $50
Stock Complete clutch (basket, plates, springs, and pressure plate) - $75
TC Racing head (port/polished, cams, etc.) - $900 OBO
Stock white plastic w/ lights - $350
Stock white plastic race cut - $250
Yoshimura Titanium tri-oval exhaust (header needed) - $100

400EX
Stock Axle - $50
Stock air boot (from air box to carb) - $10

TRX 450R
BRAND NEW Houser long travel A-arms (black) - $900
Axis rear shock - $800

250R
Complete bottom end (new crank, cases cut for big bore) - $900 OBO
Gibson long travel A-arms (Chrome upper, red vein lower) - $750 OBO
Pro Design shift lever - $10
Maier tank cover (red) - $10
Laker Custom plastics (yellow) - $250
RPM Dominator axel (stock hubs included) - $300
RPM Dominator II axel (stock hubs included) - $350

Miscellaneous
Acerbis Rally handguards (red/white) - $60
Acerbis Rally handguards (blue/white) - $60

Prices are NEGOTIABLE. Make an offer if you are interested, I may lower the prices. Pictures are available upon request. PM me or e-mail EllerbroekRacing@aol.com for more information.

[quad]

I'll take the case saver,pm me ya addy n info.

[gyii]

I'll take the Yoshi tri oval. Just reply to my emails, please.

[Knips178]

Send a pic of the pro design shift lever for the 250r to knips178@hotmail.com. I just need to see what style it is.

[Knips178]

so do you still have the pro design shifter? and what about a stock 250r wiring harness?

[Knips178]

you still have the gibson a-arms? what length are they? send pics to knips178@gmail.com

[svtKFX400]

i will buy the service manual email me at mewraider22@yahoo.com

[gump]

i'll take the case saver, how about $400 for the swingarm ? low on cash.. take paypal ?

[Johnny & Monica]

I want the Graphics an ars a-arms for z400 pm me

[416exmx]

if the Gibson 250r a-arms are +3 i'm interested in them. pm me.

[400lighted]

I am looking for a nice pan and seat foam off any year 250r....it doesnt have to have a seat cover but the foam and pan need to be "ok". Let me know if you have one and how much....Thanks

[grubbyernie]

are the houser a-arms +1or +2 for 450r.

[WOWA450RRRR]

i ll take the service manual and the k & n for the z. got a pay pal. kbarker6@tampabay.rr.com

[QuAdEr 317]

red acerbis rally pro handgaurds? do they have a bar kit? if so is it fror big bars or the regular 7\8 bars? ne pics?

[quad]

I think he was blowin smoke up our ***'s.He hasnt replied to this post since he made it in september.:rolleyes:

[jk250r]

do u still have the RPM axles??? If so how much??? Could u send some pics??? josh

lager02_9@hotmail.com

[1fastZ1slowridr]

Spindle? need a front left if its straight

[250R-Dee]

I have made the same mistake a couple times but you guys need to look at the date of the original post:blah: