hardtime
08-27-2004, 06:28 PM
I have successfully added a brake light on my 400EX with both front and rear switches. Thanks for all those who provided input (special thanks to tprender).
http://www.fidnet.com/~tmax/fswitch.jpg
$15 for K&S #12-0010 Hydraulic Switch
http://www.fidnet.com/~tmax/hswitch.jpg
Special thanks to tprender (clutch/neutral switch)
http://www.fidnet.com/~tmax/handlebar.jpg
Picture of finished wiring on handlebars
http://www.fidnet.com/~tmax/lens.jpg
$7.50 for 2 plugs and bulbs in factory lens
http://www.fidnet.com/~tmax/tail.jpg
Tail light only
http://www.fidnet.com/~tmax/brake.jpg
Brake light only
http://www.fidnet.com/~tmax/allburn.jpg
Brake & tail lights both on
Total time was about 2 hours. All connections were either soldered or bullet connector plugged. All wiring was shrink tubed. Super clean and really easy.
http://www.fidnet.com/~tmax/fswitch.jpg
$15 for K&S #12-0010 Hydraulic Switch
http://www.fidnet.com/~tmax/hswitch.jpg
Special thanks to tprender (clutch/neutral switch)
http://www.fidnet.com/~tmax/handlebar.jpg
Picture of finished wiring on handlebars
http://www.fidnet.com/~tmax/lens.jpg
$7.50 for 2 plugs and bulbs in factory lens
http://www.fidnet.com/~tmax/tail.jpg
Tail light only
http://www.fidnet.com/~tmax/brake.jpg
Brake light only
http://www.fidnet.com/~tmax/allburn.jpg
Brake & tail lights both on
Total time was about 2 hours. All connections were either soldered or bullet connector plugged. All wiring was shrink tubed. Super clean and really easy.