250x/300ex header differance?

[studbacker56]

is there a differance in the header for a 250x than the one for a 300ex? is the 300ex header bigger arround. is any other header that i can use with my hmf pipe for a 250x? i dont want to put the stock 1 incher on there....

[300exOH]

250x and 300ex stock headpipes are the same. I have read that you can use a WB headpipe with any slip on because it claims to work with the stock silencer also.

[400ex men]

there is a differance in the header for a 250x than the one for a 300ex but the 300ex header bigger is not arround. but there is a differance

[jerry-89-250R]

there are 2 different aftermarket big head pipes , one has a shorter bend "doesn't go around the frame" the longer bend goes around the frame, both fit 250's and 300's,

[400ex men]

thats what im sayin jerry-89-250R
:)

[studbacker56]

ok. here is my situation. my stock muffler and header is bent (dont ask). so i bought the one aqnd only, the best. a blue powdercoated hmf slip on. i needed a header so i didnt want to put the stock one back on so this is how i c it. hmf makes their silencer with the same pipe routing as stock but dont make a header. so white brothers slip ons have the same routing as the stock muffler also to fit on the stock header so if the white brothers header will fit their e-series slip on then their header has to fit my hmf. right??

[jerry-89-250R]

it "should fit" if the muffler is for a 250/300, the bigger aftermarket head pipes are the same size as the "bushing" on the end of the stock head pipe "where the muffler attaches",

[Cody_300ex]

None.:o :rolleyes: