416

[yz426ex36]

hey guys Im new and want to sell a 416 ex motor I have a 41fcr carb all elec. and batt I also have a extra ported head
motor is in perfect shape has less than 5 hours of ride time (no race) I put the motor back in and decided to go yz 426!!!!!!!!

[Xowner]

how much for it?

[yz426ex36]

what would you want everything or just motor (motor is black with polished side cases)

[Xowner]

is the ported head on the motor? if no how much for just the motor and the ported head ? and then how much for just the motor !

[yz426ex36]

both heads are ported and I will take 850 for motor with both heads and extra vavle cover the one one the motor is also polished or 700 just motor

[Xowner]

ok tell me more about the engine cam ? or is it just 416ed and ported no hop up cam?

[yz426ex36]

motor has hd timing chain nex clutches 416 11:1 had a cam but sold it already to a friend it had a stage 2 hot cam and this motor ran strong the bike is gettin gtore apart this weekend or next so the motor can b estarted and test ran I think the stock cam makes it run about the same

[yz426ex36]

I am throwing in a coil with a hot wire and starter

[brighteyed]

Very interested, check you private messages.
Elijah

[Craig02]

How much for the carb? What condition is it in and what jets come with it?

[yz426ex36]

300 with cable for thumb throtle has aftermarket red anodized accelerator pump cover that gives better response when you hit the throtle

[mikeboone]

Replied in your FCR post I will take the carb. Thanks-Mike