pics of my a-arms...r they right???

[Scro]

left side....

http://images.andale.com/f2/106/128/13885690/1092783649928_honda001.jpg

another left side....


http://images.andale.com/f2/106/128/13885690/1091817395782_honda003.jpg

right side....

http://images.andale.com/f2/106/128/13885690/1091452156710_honda002.jpg

another right side....

http://images.andale.com/f2/106/128/13885690/1094715222859_honda004.jpg

Now....my question is do i have the two upper a-arms backward or is it supposed to have the much positive caster??? Also are the ball joints supposed to be in this akward position? Please i dont wanna get flamed this is my first set of a-arms.

[mxmike17]

Yes id say you got eather the top or botoms crosed up.

If I had to guess your shock dont even come close to mounting up like that.

[Scro]

im pretty sure i have the shock mounted right....i mean there is only one real way to mount it....right? my biggest concern is the caster being too much on the positive side....is it supposed to be this way or what???

[Hammer trx450r]

nah it looks fine. it should be about 4 degrees

[oldsandman]

Are they adjustable? Or are they fixed? I can't tell for sure from the picture but it appears the top arms may be swapped. If you could get a picture of the full arm it would be easier.

[465Stroker]

If those are LSR's they look to be mounted backwards..

[Scro]

well they are lonestars...that may be the same as lsr's...i dont know....if some one could post a pic of the stock setup directly above the ball joints...i would GREATLY appreciate it:D

[C41Xracer]

the tops are on wrong, switch them

[Hammer trx450r]

definatly need a wider shot, hard to tell by those pics

[Scro]

thanks guys....i did have them on wrong after all...i guess that is what i get for tryin to do things myself...lol