400ex parts- giant garage sale2

[muff]

Feel free to make some offers! I can take paypal or money orders.

-Roll Design +3 long travel a-arms. Chrome uppers and buyers choice of powdercoated lowers (any color). Walsh tie rods and ends (totally trick). Lower ball joints were replaced in april, upper ball joints need to get replaced soon. $850 *Price Lowered
http://www.imagestation.com/picture/sraid130/pb05e90c03b6a9c4a2118924f4abb43ab/f7c21618.jpg

-Baldwin front hubs. Polished with anodized blue cap. These hubs have 3 bearings (2 outer 1 inner). $200 *Price Lowered
http://www.imagestation.com/picture/sraid130/p1276c80ea7f4212dfea35d1262070a72/f7c21621.jpg

-Rear brake system. Caliper and pedal are powdercoated translucent blue, streamline stainless rear brake line, comes with master cylinder and resivor, and Cascade polished parking brake blockoff, needs pads. $125
http://www.imagestation.com/picture/sraid134/pa238611f60b3a0e261058cc5dea02c5f/f774a4b0.jpg

-rear linkage. pivot works bearings were installed this spring, in great shape. $50 *price lowered
http://www.imagestation.com/picture/sraid134/p8d022f44531a3a82e8b9e0b697924d12/f774a4c9.jpg

-rear hubs, powdercoated translucent blue this spring. splines are in good shape $50 *price lowered

-walsh antivibe handlebar clamp. for 1 1/8" (oversized) bars. mounts the key and pro design kill switch $65 *just added
http://www.imagestation.com/picture/sraid134/p50eaa7a3d0deed83ad0988613bd268b7/f774a4af.jpg

[muff]

-2001 400ex motor. brand new jug/cylinder, new Wiesco 11:1 compression standard bore. new stock studs. comes with starter. runs great, good power and very low hours since new parts, no more than 6. $800

-stock front hubs. excellent shape, good bearings. rotors have been sold. $40
http://www.imagestation.com/picture/sraid134/p9c0f9be4a8f69f3440c4b506bf614c39/f774a4b2.jpg

-Holeshot 22" XCR fronts on Douglas .190 aluminum rims. Rims have only one flat spot, great condition otherwise. One tire leaks approx. 1/2 pressure overnight. still good tread. $100
http://www.imagestation.com/picture/sraid131/pfe970c3c7c571a24ce2cac9af5f06575/f7ab7789.jpg

-left spindle. used, straight and in good condition $35
http://www.imagestation.com/picture/sraid131/p92403ab017cba0887ccf45d80cb36994/f7ab67b6.jpg

-stock rear brake hub and locknut, good condition, no cracks and splines are in good shape $30

-front hubs, recently powdercoated blue by pappy, bearings have only had a few rides $45
http://www.imagestation.com/picture/sraid131/pb1d507278138dddcf07a34f182fd80d5/f7ab5f82.jpg

-complete front brakes. Master cylinder, brake lines, and calipers, all ready to go. $100
http://www.imagestation.com/picture/sraid134/p8bd63e93a0c9393b222e03f62882c831/f774a4be.jpg

-oil cooler with lines, fins are in good condition $20

-stock gas tank, no petcock $25
http://www.imagestation.com/picture/sraid131/p069e1ea992a47cccbd1eff0feb105c52/f7ab7741.jpg

[muff]

-gas tank plastic (the white piece under the gas tank) $15
http://www.imagestation.com/picture/sraid131/p9b31aaa63bfcef98fb07a921185ec1db/f7ab7761.jpg

-black stock side panels with ceet graphics $20
http://www.imagestation.com/picture/sraid134/pfd4bfabd2f683e2ccc342c73ec0bd34a/f774a4c0.jpg

-Rear caliper mounting bracket, c-clip, and slide ring $10
http://www.imagestation.com/picture/sraid131/p3c331698868b9651e3917b61d09889c5/f7ab7794.jpg

-Complete electrical. Battery, coil, etc. everything! stock headlight switches have been removed, now has a kx kill switch start button, and pro design tether switch that is wired in. $125
http://www.imagestation.com/picture/sraid134/p1819e0bd5be877a3c2a8be8c9c9977e8/f774a4bc.jpg

-Full Body skid plate, i believe its an AC but i'm not positive. its the one in the middle. has seen abuse but still works fine. $30
http://www.imagestation.com/picture/sraid134/p00a8122a155abfbcf866fa869c42b00e/f774a4b9.jpg
http://www.imagestation.com/picture/sraid134/pc6978b806a1b4029ddbb25f8d4946eab/f774a4cf.jpg

[muff]

bump

[sticksracing]

is that stem plus 1 and does it come with the clamp

[muff]

Originally posted by sticksracing
is that stem plus 1 and does it come with the clamp

i believe its standard length and does not come with a clamp.

[sticksracing]

is it 50 shipped?

[muff]

Originally posted by sticksracing
is it 50 shipped?

I would like to get shipping added on, but if you pm me where you live we could work a deal out on shippin.

[Snow]

how much for the 400ex seat cover?

[muff]

Originally posted by nacsracer250r
how much for the 400ex seat cover?

are you asking about the gripper? because that one is going with the graphics. I do have a stock black seat cover in good condition with no tears for $30 shipped.

[Honda5]

I can go 150 on the front brake set ( blue ) if you can throw in the piece that goes under the gas tank .

[muff]

check your pm's honda

[muff]

bump

[muff]

bump

would you able to ship to canada and put the skids on ebay?

[muff]

Originally posted by sEX
would you able to ship to canada and put the skids on ebay?

yes i could do that, you would have to pay the extra shipping cost however. why not just sell it over here and save me 1. the hassle of putting it on ebay, and 2. the ebay fees (which can really add up)

[muff]

prices on roll a-arms and baldwin hubs have been lowered!

parts may start going on ebay soon.

Hey, I'll give ya 55$ and shipping for the graphics kit and seat cover. How much would shipping be to Alberta Canada? Thanks.

[muff]

Originally posted by Yoshi18
Hey, I'll give ya 55$ and shipping for the graphics kit and seat cover. How much would shipping be to Alberta Canada? Thanks.

i need you zip code to calculate shipping cost

It's T0A 1P0. Get me a final price for the kit with shipping and we'll work something out. Thanks.

BTW, I want shipping insurance on it as well. So like i said, figure out the total cost with shipping and insurance and get it to me as fast as you can. Thanks.

[muff]

bump

Check yo PM's muff...:cool:

[muff]

bump

[jaspurx]

$100 shipped? or I pay shipping?

[quadmxracer]

Trade a stock 03' 400ex axle for your stock (red) hubs/rotors?
Let me know if it sounds like something you'd like to do.

[muff]

Originally posted by jaspurx
$100 shipped? or I pay shipping?

$110 shipped and they're yours.

sorry no trades for any parts.

[mckenzie016]

you still have the stock front hubs? either red or blue.. if so PM me back
thanks kyle

[muff]

i have them both still. $40 for the red ones without the brake rotors (no longer available). and $45 for the blue ones

[muff]

bump

[PismoGuy400]

whats left?

[muff]

Originally posted by PismoGuy400
whats left?

everything that is still listed on the first page. if a part sells then i pull it off the list

[Crazy400EX]

very happy with the air box and air filter you sold me....can i get your stock front brake lines?

[muff]

i dont want to have to split the front brakes apart unless other people were interested in the calipers and master cylinder. i might have stock lines kickin around but i'm not sure

[TC426EX]

Muff, the spindles were mint... thanks

You got that external FST oil cooler still? Also, you got any front .190 rims 10x5 for MX tires???

[muff]

Originally posted by TC426EX
Muff, the spindles were mint... thanks

You got that external FST oil cooler still? Also, you got any front .190 rims 10x5 for MX tires???

i tried to pm you back about that but your box was full. the FST cooler will be selling with the 440 motor that i have to fix up. as for rims i only really have stock rims with kendas, and maybe Douglas 4:1 offsets with rolled edge with kendas

[downieball]

hey muff how much for the motor and oil cooler, also do you have a swingarm bolt?

[muff]

Originally posted by downieball
hey muff how much for the motor and oil cooler, also do you have a swingarm bolt?


$850 shipped for everything you listed :cool:

*note i only have the oil cooler and lines, not the tank itself

[brian-250]

How much shipped to 46052 on the holeshots and maby the red hubs.:)

[muff]

Originally posted by brian-250
How much shipped to 46052 on the holeshots and maby the red hubs.:)

$165 for the wheels and hubs shipped. $125 for just the wheels shipped.

[muff]

bump

[wetNwild]

stock wheels for sale if so how much

[muff]

Originally posted by wetNwild
stock wheels for sale if so how much

sorry i dont have any stock wheels kickin around.

[muff]

bump :macho

[muff]

up^^^

[mxquadracer]

wow still got some stuff left. good luck selling

free bump

[muff]

thanks for the BUMP

[2banshees]

do you have a 400ex cylinder you'd sell?

[muff]

Originally posted by 2banshees
do you have a 400ex cylinder you'd sell?

no sorry.

[Honda5]

got the brake parts they look good thanks
dave

[EXrider65]

do u still have the skid plate

[muff]

Originally posted by EXrider65
do u still have the skid plate

I have the full body one for $30 if thats the one your asking about. $45 shipped and its yours.

I'm actually not sure if i have the hardware for it or not. I will have to check this weekend and let you know.

[muff]

bump!

parts will be going on ebay next week :cool:

[rdgarry]

Do you have a stock 400ex carb for sale?

[muff]

Originally posted by rdgarry
Do you have a stock 400ex carb for sale?

i dont have any carbs...

[muff]

bump