hondarider2006
08-12-2004, 01:16 AM
Well this summer I decided to go all out, and put about $3,600 into the quad.....Finaly got around to washing it, and takin some pics. Here is what all it consists of now...
JE 416 10:8.1 piston
Hot Cams Stage II
Cometic base gasket, stock head gasket
Magnum rev box
HMF slip-on
Grinded out welds on stock header
Elka tripple rate w/ rezzys
Burgard +3 +1 a-arms
Burgard +1 anti-vib stearing stem
Burgard twin-row bearing carrier
Durablue +2+2 axle
Razrs all around
Itp front rims, and Douglas rears
Ac Standard nerfs
Nacs case saver
Denton stabalizer
Speed pb block off
ex-pull clutch
Gunnar teather
New front and rear sprockets on their way
Diamond o-ring chain
RM kill bitton as starter button
Stock throttle body powder coated(candy red I believe) and lever pollished
Streamline ss front break lines
I am sure I am forgetting a few things.....but this is most of it. All I need now is a new +1 1/4 swing arm, and a Elka rebuild on my rear shock and I will be ready to go
:cool:
JE 416 10:8.1 piston
Hot Cams Stage II
Cometic base gasket, stock head gasket
Magnum rev box
HMF slip-on
Grinded out welds on stock header
Elka tripple rate w/ rezzys
Burgard +3 +1 a-arms
Burgard +1 anti-vib stearing stem
Burgard twin-row bearing carrier
Durablue +2+2 axle
Razrs all around
Itp front rims, and Douglas rears
Ac Standard nerfs
Nacs case saver
Denton stabalizer
Speed pb block off
ex-pull clutch
Gunnar teather
New front and rear sprockets on their way
Diamond o-ring chain
RM kill bitton as starter button
Stock throttle body powder coated(candy red I believe) and lever pollished
Streamline ss front break lines
I am sure I am forgetting a few things.....but this is most of it. All I need now is a new +1 1/4 swing arm, and a Elka rebuild on my rear shock and I will be ready to go
:cool: